Loctite LOC29021 Wicking Threadlocker 10 Ml Bottle

Product Description

The LOCTITE LOC29021 is a wicking-grade liquid threadlocker designed to seal and secure metal threaded assemblies after they have already been assembled. The low-viscosity formula wicks into tight thread gaps by capillary action, filling the space between mating metal parts and curing in place to prevent loosening and leakage. This makes it a practical solution when disassembly prior to application is not possible. Suitable for both low and high pressure applications, the product seals immediately for low-pressure testing and reaches full cure strength capable of withstanding the burst pressure of most standard piping systems. It is packaged in a 10 ml bottle for precise application control.

This threadlocker is used across HVAC, plumbing, and mechanical service work where pre-assembled threaded metal joints need to be locked or sealed without disassembly. Typical applications include locking set screws, sealing pipe fittings, and securing fasteners on rotating equipment that are already torqued in place. The wicking action is especially useful on small-diameter fasteners and close-tolerance assemblies common in residential and light commercial mechanical systems.

Key Features

• Wicking-grade low-viscosity formula penetrates assembled threads by capillary action
• Seals instantly for low-pressure testing after application
• Cures to burst strength of most standard piping systems when fully cured
• Suitable for both low and high pressure service applications
• 10 ml bottle supports controlled, precise dispensing on small fasteners and fittings

Compatibility

Designed for use on pre-assembled metal threaded parts and fittings where wicking-grade thread sealing and locking is required. Consult the product technical data sheet to confirm suitability for specific metals, coatings, or service fluids before application.

Installation Notes

Application is performed by licensed plumbers, HVAC technicians, and mechanical contractors as part of routine maintenance or assembly work. Shut off system pressure and isolate the assembly from live flow before applying to any active piping joint. Allow full cure time before returning the assembly to high-pressure service. Surfaces should be free of oil, grease, and loose contamination to achieve rated adhesion and seal strength.

Technical Specifications

• Grade: Wicking
• Volume: 10 ml
• Weight: 0.046 pounds
• UPC: 079340290217

Standard Information

• Brand: LOCTITE
• Manufacturer Part Number: LOC29021