Loctite 237115 Two-part Epoxy 400 Ml Cartridge Black

Product Description

The LOCTITE 237115 is a two-part epoxy adhesive supplied in a 400 mL dual-cartridge format designed for structural bonding applications across industrial and commercial trades. It mixes at a 1:1 ratio and delivers a 60-minute working time, giving installers adequate open time for part alignment and fixturing before the bond sets. Fixture time is 180 minutes, with full cure achieved in 4 to 12 hours depending on ambient conditions. The adhesive cures to a black finish and is rated to a shear strength of 3110 psi. CFIA approval is noted, indicating suitability for certain food-adjacent environments when used per application guidelines.

This epoxy is used in applications requiring a high-strength, rigid bond on materials including cardboard and similar substrates. The cartridge format is suited to assembly lines, maintenance and repair operations, and field service work where controlled dispensing is required. The E-60NC series is intended for scenarios where a moderately extended working window is needed for complex or multi-piece assemblies. It is applicable in light industrial, facilities maintenance, and equipment repair contexts.

Key Features

• 1:1 mix ratio cartridge eliminates manual measuring and reduces mix errors
• 60-minute working time allows positioning and adjustment of bonded components
• Fixture time of 180 minutes supports production workflow planning
• Full cure in 4 to 12 hours for return-to-service scheduling
• 3110 psi shear strength provides a high-strength structural bond
• CFIA Approved for applicable use environments

Compatibility

Rated for bonding to cardboard per manufacturer specifications. Designed as part of the LOCTITE E-60NC series for applications requiring extended open time in a two-part epoxy format.

Installation Notes

Application should be performed by qualified maintenance or assembly technicians familiar with two-part adhesive dispensing equipment. Ensure surfaces are clean, dry, and free of oils or contaminants before applying. Use a compatible static mixing nozzle to ensure proper 1:1 ratio delivery; purge a small amount of material before bonding. Allow full cure time to elapse before subjecting the bond joint to load or stress.