Lift-all EE2806TTX20 Polyester Eye Eye Sling 6in 20ft

Product Description

The LIFT-ALL EE2806TTX20 is a two-ply polyester flat eye-and-eye lifting sling rated for 32,600 pounds in a vertical hitch configuration. Constructed with twisted and tapered eyes at both ends, this sling delivers a secure, positive engagement at the hook and load point. The polyester webbing resists abrasion and is rated for service up to 200 degrees F. At 6 inches wide and 20 feet in length, it is sized for heavy industrial lifts where load surface protection and working load capacity are both critical priorities. Rigging professionals and crane operators use this sling in single-leg vertical and choker hitch applications across manufacturing, construction, and heavy equipment handling.

This sling is suited for single-leg rigging operations in industrial and commercial settings. The wide 6-inch body distributes load contact across a larger surface area, reducing the risk of damage to finished or sensitive load surfaces. A choker hitch capacity of 13,200 pounds applies when the sling is configured in a choker arrangement. The gray and blue color coding assists in quick load capacity identification on the job site. Rigging crews working under OSHA and ASME standards will find this sling compliant with the applicable requirements for synthetic web slings.

Key Features

• Two-ply polyester construction provides durability and load stability in vertical and choker hitch configurations
• Twisted and tapered eyes at both ends for secure hook engagement and reduced twisting at connection points
• Abrasion-resistant webbing extends service life in rough or high-cycle environments
• Rated for service temperatures up to 200 degrees F
• Compliant with OSHA 1910.184, ASME B30.9, and WSTDA standards for synthetic web slings
• Wide 6-inch body helps protect load surfaces during lifts

Compatibility

Designed as a standard eye-and-eye synthetic web sling for use with overhead cranes, hoists, and rigging hardware rated for the applicable working load limits. Verify hook, shackle, and lifting equipment ratings before use.

Installation Notes

Inspection, rigging, and retirement of synthetic web slings must be performed by a qualified rigger in accordance with OSHA 1910.184 and ASME B30.9. Before each use, inspect the sling for cuts, abrasion, heat damage, chemical exposure, and distorted fittings. Never exceed the rated working load limit for the chosen hitch configuration. Remove the sling from service immediately if any damage or wear beyond acceptable limits is identified during inspection.