Lift-all EE2804DFX14 Eye Eye Polyester Web Sling 14 Ft

Product Description

The LIFT-ALL EE2804DFX14 is a flat eye and eye polyester web sling designed for single-leg vertical and choker lifting applications in industrial and construction environments. Measuring 4 inches wide and 14 feet long, this Type 3 sling carries a vertical capacity of 11,500 pounds and a choker capacity of 9,200 pounds across its two-ply flat web construction. The tapered flat eyes at both ends seat cleanly into hooks and shackles. Yellow polyester construction provides abrasion resistance and visual identification on the job. Riggers and material handlers working in general industry or construction install this sling where a soft, non-marring, single-leg lift is required.

This sling is suited for single-leg rigging in manufacturing, fabrication, warehousing, and construction where polyester web is preferred over wire rope or chain. The flat eye profile allows the sling to seat flat against hooks without bunching. The two-ply polyester web handles loads up to 11,500 pounds vertically and resists abrasion in repetitive use environments. It is rated for use in environments up to 200 degrees F. Applications include lifting steel plate, structural members, machinery, and bundled materials where a wide, load-distributing contact surface is needed.

Key Features

• 11,500 lb vertical load capacity and 9,200 lb choker capacity
• Two-ply flat polyester web construction with abrasion resistance
• Flat and tapered eye design at both ends for clean hook and shackle seating
• 4-inch width distributes load across the contact surface to reduce marring
• Rated for use up to 200 degrees F
• Meets OSHA 1910.184, ASME B30.9, and WSTDA standards

Compatibility

Designed as a standard Type 3 flat eye and eye polyester web sling suitable for use with hooks, shackles, and rigging hardware sized for a 4-inch wide sling eye in single-leg vertical and choker lift configurations.

Installation Notes

Rigging and installation should be performed by a qualified rigger following OSHA 1910.184 and ASME B30.9 guidelines. Inspect the sling before each use for cuts, abrasion, broken stitching, or chemical damage and remove from service if any defect is found. Never exceed the rated load capacity for the hitch type in use. Protect sling edges from sharp corners using edge protectors to prevent cutting the web during the lift.