Lift-all EE2803TTX8 Eye Eye Polyester Sling 3in 8ft 8800lb

Product Description

The LIFT-ALL EE2803TTX8 is a two-ply polyester web sling configured in an eye-and-eye arrangement with twisted and tapered eyes on both ends. It measures 3 inches wide and 8 feet long, with a vertical lift capacity of 8,800 pounds and a choker capacity of 7,040 pounds. The twisted eye design allows the sling to seat more securely against hooks and hardware during a lift. Constructed from abrasion-resistant polyester webbing, this sling is rated for use in environments up to 200 degrees F. It is a single-leg sling weighing approximately 3.2 pounds and ships in gray and blue coloring consistent with capacity identification standards.

This sling is used in rigging applications across construction, manufacturing, and material handling operations where a soft sling is preferred to protect finished or coated surfaces. The eye-and-eye configuration suits vertical hitch and choker hitch rigging setups. It is appropriate for residential and commercial jobsite lifts, millwright work, and general overhead lifting where load weights fall within rated capacity. Licensed riggers and trained lifting personnel are the primary installers and operators of this product.

Key Features

• Twisted and tapered eyes on both ends for secure hook seating and reduced load slippage
• Two-ply polyester construction provides abrasion resistance and load distribution
• 8,800 lb vertical capacity and 7,040 lb choker capacity for single-leg use
• Rated for continuous use up to 200 degrees F
• Compliant with OSHA 1910.184, ASME B30.9, and WSTDA standards
• Soft sling design protects sensitive or finished load surfaces from damage

Compatibility

Designed as a standard eye-and-eye web sling for use with compatible hooks, shackles, and rigging hardware rated at or above the sling working load limit. Verify all connecting hardware meets or exceeds the sling capacity before use.

Installation Notes

Rigging and overhead lifting must be performed by qualified personnel following applicable OSHA and ASME B30.9 guidelines. Inspect the sling for cuts, abrasion, UV degradation, and heat damage before each use and remove from service if any defects are found. Never exceed the rated working load limit for the hitch configuration in use, and avoid contact with sharp edges without appropriate edge protection. De-rig and store the sling away from direct sunlight, chemicals, and extreme temperatures when not in use.