Lift-all EE2801DTX10 Eye Eye Polyester Sling 1in 10ft

Product Description

The LIFT-ALL EE2801DTX10 is a two-ply polyester web sling with a twisted eye-and-eye configuration, built for single-leg vertical and choker lifting applications. It measures 1 inch wide and 10 feet long, with a vertical capacity of 3,200 lb and a choker capacity of 2,500 lb. The twisted eye design allows the sling to seat naturally around hooks and shackles, reducing slippage during the lift. Rated to a maximum working temperature of 200 degrees F, this sling is suited for rigging environments where synthetic slings are preferred over wire rope or chain. It is identified by its yellow color, standard for polyester web slings under ASME B30.9 color-coding guidance.

This sling is used in single-leg rigging setups across construction, manufacturing, warehousing, and industrial maintenance. The eye-and-eye configuration makes it a direct-connect option for use with hooks, shackles, and lifting beams. It is appropriate for vertical hitch and choker hitch applications in both shop and field environments. Riggers, millwrights, and maintenance crews handling moderate-duty lifts will find this sling appropriate for loads within its rated capacity. It is not intended for basket hitch configurations unless rated capacity for that hitch angle is separately confirmed.

Key Features

• 3,200 lb vertical capacity and 2,500 lb choker capacity for single-leg use
• Two-ply polyester construction provides abrasion resistance and load flexibility
• Twisted eye-and-eye design seats securely on standard hooks and shackles
• Rated for use up to 200 degrees F continuous working temperature
• Meets OSHA 1910.184, ASME B30.9, and WSTDA standards
• Yellow color for easy identification and compliance with industry sling color conventions

Compatibility

Designed as a standard twisted eye-and-eye polyester web sling compatible with hooks, shackles, and lifting hardware rated for the corresponding load. Confirm hardware working load limits before use.

Installation Notes

Installation and use should be performed by a qualified rigger familiar with ASME B30.9 and OSHA 1910.184 requirements. Inspect the sling before each use for cuts, abrasion, UV degradation, or chemical damage and remove from service if any are found. Never exceed the rated capacity for the hitch type being used, and ensure all hooks and shackles are properly seated and moused before lifting. Do not use this sling if the load temperature exceeds 200 degrees F or if exposure to acids, alkalis, or other chemicals affecting polyester is present.