Lift-all EE1802TFX9 Flat Eye Polyester Sling 2in 9ft

Product Description

The LIFT-ALL EE1802TFX9 is a single-ply, flat eye-and-eye polyester web sling rated for vertical lifting applications in industrial and construction environments. Measuring 2 inches wide and 9 feet long, this Type 3 sling carries a vertical capacity of 3,200 pounds and a choker capacity of 2,500 pounds. Constructed from abrasion-resistant polyester webbing, it is designed to protect load surfaces while maintaining reliable tensile performance across a broad range of rigging tasks. Licensed riggers and material handlers install this sling as part of compliant overhead lifting systems.

This sling is suited for single-leg vertical and choker hitches in light-to-medium-duty rigging operations. Typical applications include equipment positioning, structural component lifts, and material handling on industrial job sites and in manufacturing facilities. The flat eye configuration allows easy attachment to hooks, shackles, and lifting points without requiring hardware modifications. It is rated for use in temperatures up to 200 degrees F, making it appropriate for most standard indoor and outdoor environments.

Key Features

• Vertical capacity: 3,200 pounds; choker capacity: 2,500 pounds
• Single-ply polyester construction with abrasion-resistant webbing
• Flat eye terminations on both ends for straightforward hook and shackle attachment
• Rated for use up to 200 degrees F
• Meets OSHA 1910.184, ASME B30.9, and WSTDA standards
• Type 3 sling classification per industry designation

Compatibility

Designed as a standard flat eye-and-eye Type 3 web sling for use with compatible hooks, shackles, and rigging hardware rated at or above the sling working load limit in single-leg overhead lifting configurations.

Installation Notes

This sling must be installed and operated by a qualified rigger in accordance with OSHA 1910.184 and ASME B30.9. Inspect the sling for cuts, abrasions, chemical damage, heat damage, and broken stitching before each use, and remove from service if any defects are found. Never exceed the rated working load limit for the hitch configuration in use. Do not use with sharp edges unless edge protection is in place.