Lift-all EE1801TFX4 Flat Eye Eye Polyester Web Sling 1 in 4 Ft

Product Description

The LIFT-ALL EE1801TFX4 is a single-leg flat eye-and-eye polyester web sling designed for overhead lifting in rigging applications. Measuring 1 inch wide and 4 feet in length with a 48-inch leg, this Type 3 sling carries a vertical capacity of 1,600 pounds, a choker capacity of 1,280 pounds, and a basket capacity of 3,200 pounds. Constructed from polyester webbing, it offers abrasion resistance and a maximum operating temperature of 200 degrees F. Rigging professionals and millwrights install this sling where a lightweight, flat-eye termination is required for attaching to hooks, shackles, or lifting fixtures.

This sling is suited for single-leg vertical and choker hitches as well as basket configurations on construction sites, manufacturing floors, and equipment-handling operations. Its flat eye terminations allow for straightforward attachment to standard rigging hardware. The 1-inch-wide profile is well matched to light-to-medium-duty lifts where a narrow sling body is needed to clear tight attachment points or work alongside delicate load surfaces.

Key Features

• Type 3 flat eye-and-eye termination on both ends for direct hook or shackle attachment
• 1,600 lb vertical capacity and 3,200 lb basket capacity in a single-leg configuration
• Polyester construction provides abrasion resistance and protects loads from marring
• Rated to 200 degrees F maximum operating temperature
• Meets OSHA 1910.184, ASME B30.9, and WSTDA standards
• Single-ply webbing, 1 inch wide, for use in tight clearance applications

Compatibility

Designed as an OEM-style flat eye-and-eye web sling for use with standard rigging hooks, shackles, and lifting fixtures compatible with 1-inch-wide eye terminations.

Installation Notes

Installation and use must be performed by a qualified rigger familiar with OSHA 1910.184 and ASME B30.9 requirements. Inspect the sling for cuts, abrasions, chemical damage, and distorted eyes before each lift. Never exceed the rated capacity for the hitch configuration in use, and ensure the eye terminations are fully seated in the hook bowl before applying load. Remove from service immediately if any signs of damage are present.