Leviton R32-GFNT2-0RW 20A 125V White Self-test Gfci Receptacle

Product Description

The LEVITON MFG CO R32-GFNT2-0RW is a 20-amp, 125-volt slim self-testing GFCI duplex receptacle designed for residential and commercial electrical installations. The built-in SmartLock Pro circuit uses automatic self-testing to verify GFCI protection is active without manual intervention. An LED indicator provides visual status at a glance. The receptacle features an impact-resistant thermoplastic body rated for power surge and corrosion resistance. A licensed electrician installs this outlet where GFCI protection is required by the NEC, including bathrooms, kitchens, garages, and outdoor locations.

This GFCI receptacle is suited for 20-amp branch circuits in both residential and light commercial settings where code mandates ground-fault protection. It uses a backwire screw pressure plate with two holes per termination and screws backed out for faster wiring. The SmartLock Pro lockout feature prevents the outlet from being reset if installed with a line-load reversal or mis-wired reversed line and load leads, protecting both the face and downline terminals from supplying power under a wiring fault condition. A wallplate, faceplate, and self-grounding clip are included in the package.

Key Features

• Automatic self-testing GFCI circuitry confirms protection status without manual testing
• SmartLock Pro lockout prevents reset and blocks power if line-load leads are reversed or mis-wired
• LED indicator light provides clear pass or fault status at the outlet face
• Backwire screw pressure plate with 2 holes per termination and pre-backed-out screws for efficient termination
• Impact-resistant thermoplastic body with power surge and corrosion resistance
• Wallplate, faceplate, and self-grounding clip included; meets UL 973 standard

Compatibility

Designed as an OEM-style replacement or new-installation GFCI receptacle for 20-amp, 125-volt duplex outlet positions on standard residential and commercial branch circuits requiring ground-fault protection per NEC requirements.

Installation Notes

Installation must be performed by a licensed electrician in accordance with the NEC and applicable local codes. De-energize the circuit at the breaker panel and verify zero voltage with a meter before making any connections. Observe correct line and load terminal orientation — the SmartLock Pro lockout will permanently disable the outlet if line and load leads are reversed. Secure all terminations fully before restoring power and confirming LED status.