Leviton 3033-2I 30A Industrial Toggle Three Way Switch

Product Description

The LEVITON 3033-2I is a 3-pole, industrial grade toggle three-way switch rated for 30 amps and 120 to 277 volts AC. Built for demanding environments, it operates across a wide temperature range of -40 to 149 degrees F, making it suitable for installations where standard residential or commercial grade devices would be inadequate. This switch is designed for single-phase applications and carries multiple certifications confirming compliance with national and international wiring standards. Licensed electricians install this device in heavy-duty branch circuit applications where a robust, code-compliant switching solution is required.

The 3033-2I is intended for industrial and commercial installations where higher amperage loads and wide voltage ranges are common. Its three-way toggle configuration allows control of a single load from two separate locations, a typical requirement in large equipment rooms, warehouses, manufacturing floors, and similar facilities. The ivory finish suits standard industrial enclosure and wallplate color conventions. Single-phase wiring configurations in 120 to 277 VAC systems are the primary application context.

Key Features

• 30-amp rating handles heavy-duty branch circuit loads
• Wide voltage range of 120 to 277 VAC supports varied single-phase installations
• Three-way toggle operation enables control from two switch locations
• Industrial grade construction rated for -40 to 149 degrees F operating range
• RoHS compliant and meets UL 20, UL 94 V-2, ANSI C-73, NEMA WD-1, NEMA WD-6, CSA C22.2 No. 111, and NOM 057 standards
• Ivory finish for standard industrial and commercial wallplate compatibility

Compatibility

Designed as an OEM-style replacement or direct installation switch for industrial and heavy-duty commercial single-phase electrical systems requiring a 30-amp, 120 to 277 VAC three-way toggle device.

Installation Notes

Installation must be performed by a licensed electrician in accordance with the National Electrical Code (NEC) and all applicable local codes. De-energize the circuit at the breaker panel and verify absence of voltage with a meter before beginning any wiring work. Three-way switching requires proper identification of the common terminal versus traveler terminals — consult the manufacturer wiring diagram before terminating conductors. Install in a suitably rated enclosure appropriate for the environment and load type.