Lenox 93726RPB134240 Welded Bandsaw Blade 13ft 11in

Product Description

The LENOX 93726RPB134240 is a welded bi-metal bandsaw blade engineered for demanding metal-cutting applications. Measuring 13 feet 11 inches in overall length and 1 inch wide, this blade is built on a spring steel back with M42 high speed steel teeth. The variable pitch tooth form runs 5 to 8 TPI with a vari-raker tooth set, reducing vibration and improving cut quality across a range of material thicknesses. At 0.035 inches thick with a kerf width of 0.058 inches, it delivers precise, efficient cuts in production and fabrication environments. This is an RX Plus series blade from LENOX.

This blade is suited for use on vertical and horizontal bandsaws in metal fabrication shops, maintenance facilities, and industrial cutting applications. The variable pitch design makes it effective on structural shapes, tubing, solid bar stock, and bundled materials. The positive rake angle and milled tooth form support consistent feed rates through both ferrous and non-ferrous metals. A licensed tradesperson or experienced machinist would typically install and operate this blade in a production or job-shop setting.

Key Features

• M42 high speed steel teeth for extended blade life in demanding metal cutting
• Variable pitch 5 to 8 TPI reduces vibration and noise during the cut
• Vari-raker tooth set promotes efficient chip evacuation
• Spring steel back provides flexibility and fatigue resistance
• 0.035 inch blade thickness with 0.058 inch kerf for accurate, low-waste cuts
• Welded construction for consistent loop integrity

Compatibility

Designed as an OEM-style replacement or direct-fit welded bandsaw blade for metal-cutting bandsaws accepting a 1 inch wide blade in the 13 feet 11 inch loop length.

Installation Notes

Blade installation and tensioning should be performed by qualified personnel following the bandsaw manufacturer's specifications. Always power down and lock out the machine before removing or installing a blade. Wear cut-resistant gloves when handling the coiled or uncoiled blade. Verify wheel diameter, blade guides, and tension settings are appropriate for a 1 inch wide bi-metal blade before operating.