Lenox 91080NEB113480 Welded Bandsaw Blade 14 Tpi

Product Description

The LENOX 91080NEB113480 is a welded bandsaw blade designed for continuous contour cutting in metalworking and fabrication applications. At 137 inches in total loop length and 0.032 inches thick, this blade fits standard bandsaw machines that accept that blade loop size. It is built from carbon steel throughout — both the blade body and tooth material — and runs at a constant 14 teeth per inch (TPI) pitch with a raker tooth set and straight tooth form. The hard back construction resists flexing and fatigue during extended cutting cycles. It weighs approximately 0.91 pounds. Licensed contractors, machinists, and fabricators are the typical installers and users.

This blade is suited for ferrous and non-ferrous contour cutting tasks on vertical or horizontal bandsaw machines requiring a 3/4-inch wide blade with a 14 TPI constant pitch profile. The raker tooth set performs well in general-purpose cutting of solid bar stock, tubing, and structural shapes. The toothed cutting edge and straight tooth form provide clean, consistent cuts across a range of material cross-sections. It is sold as a single blade unit.

Key Features

• Welded loop construction — 137 inches in total length, ready to mount
• 3/4-inch blade width with 0.032-inch thickness for standard bandsaw fitment
• 14 TPI constant pitch for consistent chip load across the cut
• Raker tooth set with straight tooth form — general-purpose cutting geometry
• Carbon steel blade body and tooth material — suitable for a broad range of workpiece materials
• Hard back type resists fatigue and blade deflection during extended use

Compatibility

Designed as an OEM-style replacement or direct-fit blade for bandsaw machines accepting a 3/4-inch wide welded blade with a 137-inch loop length and 0.032-inch blade thickness.

Installation Notes

Bandsaw blade replacement should be performed by a qualified technician with the machine fully de-energized and locked out per applicable OSHA lockout/tagout procedures. Verify blade tension, tracking, and guide bearing clearance according to the machine manufacturer specifications before powering the saw. Wear appropriate cut-resistant gloves when handling the coiled or uncoiled blade. Do not exceed the blade speed rating of the host machine.