Lenox 85781CLB103275 Bandsaw Blade 10ft 9in 8-12 Tpi

Product Description

The LENOX 85781CLB103275 is a welded bi-metal bandsaw blade built for production cutting across a wide range of metal stock. It measures 10 feet 9 inches in overall length and 3/4 inch in width, with a blade thickness of 0.035 inches and a kerf width of 0.058 inches. The tooth edge runs a variable 8 to 12 TPI pitch with a Vari-Raker set pattern, which distributes cutting load and reduces vibration during the cut. High speed steel M42 teeth are electron-beam welded to a spring steel back, giving the blade flex-fatigue resistance while maintaining edge hardness on difficult alloys. This blade is sized for horizontal and vertical band saws used in metal fabrication, maintenance, and machine shops.

This blade is suited for cutting alloy steel, carbon steel, stainless steel, structural steel, tool steel, aluminum, and other non-ferrous metals. The variable pitch tooth form is particularly effective on interrupted cuts, bundle cuts, and varying wall thicknesses where a single-pitch blade would load up or chatter. It is a shop-grade replacement in the LENOX Classic series, intended for professional metalworking environments where consistent blade life and cut quality are required across mixed material runs.

Key Features

• Bi-metal construction: M42 high speed steel teeth bonded to a spring steel back for durability and flexibility
• Variable 8 to 12 TPI pitch with Vari-Raker tooth set reduces vibration and chip load variation
• Blade length of 10 feet 9 inches with a width of 3/4 inch for common production band saw frames
• 0.035 inch blade thickness and 0.058 inch kerf width minimize material loss per cut
• Compatible with alloy steel, carbon steel, stainless steel, tool steel, aluminum, and non-ferrous metals
• LENOX Classic series — welded loop, ready to install

Compatibility

Designed as a direct-fit welded replacement blade for band saws accepting a 10 foot 9 inch loop length and 3/4 inch blade width. Verify your saw wheel diameter and blade guide clearance before installation.

Installation Notes

Blade installation should be performed by a qualified metalworking technician or maintenance professional. Disconnect and lock out power to the band saw before removing the old blade or mounting the new one. Wear cut-resistant gloves when handling the coiled blade — the teeth retain sharpness and the spring steel back can snap under uncontrolled uncoiling. After seating the blade on the wheels, verify blade tension and guide bearing alignment per the saw manufacturer specifications before resuming operation.