Lenox 79668CLB82565 Welded Bandsaw Blade 10-14 Tpi

Product Description

The LENOX 79668CLB82565 is a welded bi-metal bandsaw blade engineered for demanding metal-cutting applications in professional shop and industrial environments. Measuring 101 inches in length and 3/4 inch wide with a 0.035-inch thickness, this blade pairs a spring steel back with M42 high speed steel teeth for durability and heat resistance. The variable 10 to 14 TPI pitch pattern reduces harmonics and vibration during cuts, producing a cleaner kerf and extending blade life in production cutting. Licensed HVAC, plumbing, electrical, and fabrication tradespeople rely on this blade type for consistent performance across a wide range of metal stock.

This blade is suited for cutting alloy steel, carbon steel, stainless steel, structural steel, tool steel, aluminum, and other non-ferrous metals. The variable pitch and Vari-Raker tooth set make it effective on solid bar stock, tubing, and structural shapes where a fixed-pitch blade would chatter or wear prematurely. It is designed for horizontal and vertical band saws that accept a blade in this length and width. The Classic series designation indicates a standard-production, catalog-grade blade intended for regular replacement in high-use shop settings.

Key Features

• M42 high speed steel teeth for heat and wear resistance on hard metals
• Variable 10 to 14 TPI pitch reduces vibration and harmonic chatter
• Vari-Raker tooth set promotes efficient chip clearance and consistent kerf
• Spring steel back provides flexibility and resistance to blade fatigue
• 0.058-inch kerf width minimizes material loss per cut
• Welded construction for use on continuous-band power saws

Compatibility

Designed as a direct-fit replacement for band saws accepting a blade 101 inches long and 3/4 inch wide. Compatible material applications include alloy steel, aluminum, non-ferrous metal, carbon steel, stainless steel, structural steel, and tool steel.

Installation Notes

Blade installation should be performed by a qualified operator with the band saw powered down and locked out per OSHA lockout/tagout procedures. Verify that blade guides, thrust bearings, and wheel alignment are properly set before tensioning the new blade. Confirm the saw accepts a 3/4-inch-wide blade before installation, and inspect the weld joint for integrity before running the machine. Allow a brief run-in period at reduced feed pressure when breaking in a new blade.