Lenox 71891D2B113380 Welded Bandsaw Blade 14 Tpi

Product Description

The LENOX 71891D2B113380 is a welded bi-metal bandsaw blade built for continuous contour cutting across a wide range of metals and materials. Measuring 11 feet 1 inch in length and 0.5 inches wide, this blade runs at 14 teeth per inch with a constant standard pitch and a straight tooth form. The tooth material is M42 High Speed Steel, a cobalt-bearing grade selected for heat resistance and edge retention during demanding cuts. The spring steel back provides flexibility and fatigue resistance through repeated cycles. Blade thickness is 0.035 inches with a kerf width of 0.058 inches. This blade is sold as a single unit and is intended for installation on stationary vertical or horizontal bandsaw machines.

Suited for professional metalworking, fabrication, and maintenance environments, this blade handles alloy steel, carbon steel, stainless steel, structural steel, tool steel, aluminum, non-ferrous metals, and wood. The 14 TPI constant pitch and single level tooth set make it well matched to cutting solid bar, tubing, and structural sections in the mid-size range. The LENOX Classic series is a common choice for job shop environments where a reliable general-purpose bi-metal blade is needed across varied stock types and production volumes.

Key Features

• Bi-metal construction with M42 High Speed Steel teeth for extended cutting life in ferrous and non-ferrous metals
• Spring steel back for flexibility and resistance to blade fatigue
• 14 TPI constant standard pitch for consistent chip load across varied material cross-sections
• Straight tooth form with single level set and no rake angle for controlled, accurate cuts
• Kerf width of 0.058 inches minimizes material loss per cut
• Contour cutting capable for curved or irregular workpiece profiles

Compatibility

Designed as a welded replacement bandsaw blade for stationary bandsaw machines accepting a blade length of 11 feet 1 inch and a blade width of 0.5 inches. Verify wheel diameter, guide clearance, and tension capacity against the machine specifications before installation.

Installation Notes

Installation should be performed by a qualified machinist or maintenance technician with the bandsaw powered off and locked out per OSHA lockout/tagout procedures. Confirm blade length, width, and thickness match the machine manufacturer specifications before mounting. Wear cut-resistant gloves when handling the coiled blade during installation. Set blade tension and guide clearances according to the machine manufacturer guidelines before operating.