Lenox 39506CLB113505 Welded Bandsaw Blade 4-6 Tpi

Product Description

The LENOX 39506CLB113505 is a bi-metal welded bandsaw blade designed for cutting a wide range of metals in industrial and shop environments. Measuring 11 feet 6 inches in length and 1 inch in width, it fits standard vertical and horizontal bandsaws sized for that blade run. The blade body is spring steel backed, and the teeth are tipped with M42 high-speed steel for edge retention under heat. At 4 to 6 teeth per inch with a variable pitch and Vari-Raker tooth set, it balances aggressive stock removal with reduced vibration and noise across varying material cross-sections. It is 0.035 inches thick with a kerf of 0.058 inches. Licensed machinists, fabricators, and maintenance mechanics are the typical installers.

This blade is suited for production cutting and maintenance shops working with structural steel, alloy steel, carbon steel, tool steel, stainless steel, aluminum, and other non-ferrous metals. The variable pitch tooth form makes it a practical choice when a shop cuts mixed stock sizes without swapping blades. It is not intended for contour cutting. This is a straight-cut workhorse blade for flat and round stock on floor-standing bandsaw units where an 11 foot 6 inch blade is the correct fit.

Key Features

• M42 high-speed steel teeth for extended cutting life in tough alloys and stainless steel
• Variable pitch with Vari-Raker tooth set reduces vibration and improves surface finish
• Spring steel backing provides flexibility and fatigue resistance during continuous cuts
• 4 to 6 TPI range handles a broad cross-section of metal stock sizes
• Welded construction eliminates blade joints that can cause tracking issues or breakage
• 0.058-inch kerf minimizes material waste per cut

Compatibility

Designed as an OEM-style replacement or direct-fit blade for bandsaws requiring an 11 foot 6 inch blade length with a 1-inch width and 0.035-inch thickness. Verify blade length, width, and thickness against your saw manufacturer specifications before installation.

Installation Notes

Bandsaw blade installation should be performed by a qualified technician following the saw manufacturer's service manual. Power down and lockout the machine fully before removing or mounting the blade. Wear cut-resistant gloves when handling the coiled blade, as the teeth and spring steel back present a laceration hazard. After seating the blade on the wheels, verify tracking and tension according to the saw manufacturer's specified settings before resuming operation.