Lenox 28939RPB134040 Bandsaw Blade 13 Ft 3 in 1 in 3-4 Tpi

Product Description

The LENOX 28939RPB134040 is a welded bi-metal bandsaw blade engineered for demanding metal-cutting applications in professional shop and field environments. Measuring 13 feet 3 inches in length, 1 inch wide, and 0.035 inches thick, this blade delivers a variable pitch of 3 to 4 TPI using a Vari-Set tooth set pattern. The high-speed steel M42 tooth material provides extended edge life and heat resistance during high-cycle cutting. The spring steel back maintains consistent tension and fatigue resistance throughout the blade's service life. It is installed by machinists, metal fabricators, and trade professionals working with ferrous and non-ferrous stock on horizontal and vertical bandsaw equipment.

This blade is suited for contour-free straight cutting of structural steel, pipe, tubing, bar stock, and solid metal sections in both production and job-site settings. The variable pitch tooth geometry reduces vibration and harmonics, making it effective across a range of material thicknesses and cross-sections. The RX Plus series designation indicates a design intended for general-purpose metal cutting where blade life and cut quality are prioritized. It is packaged individually and sold as a single unit per order.

Key Features

• Bi-metal construction with M42 high-speed steel teeth bonded to a spring steel back for durability and flex resistance
• Variable pitch 3 to 4 TPI Vari-Set tooth pattern reduces vibration and improves cut quality across varying stock sizes
• Positive rake angle promotes aggressive, efficient cutting in metal-cutting applications
• 0.060-inch kerf width delivers consistent, accurate cuts with minimal material loss
• Welded blade loop in 13 feet 3 inches length fits a broad range of bandsaw frame sizes
• RX Plus series design targets extended blade life under repeated production cutting cycles

Compatibility

Designed as an OEM-style replacement or upgrade blade for bandsaws accepting a 13-foot 3-inch loop, 1-inch-wide blade in professional metalworking and trade cutting applications.

Installation Notes

Installation should be performed by a qualified machinist or tool operator with the bandsaw fully powered down and the drive disconnected before blade removal or installation. Blade tension and tracking should be set according to the bandsaw manufacturer specifications before resuming operation. Blade guides and thrust bearings should be inspected and adjusted whenever a blade is replaced. Proper blade break-in at reduced feed pressure for the first several cuts is standard practice to seat the tooth geometry and extend service life.