Lenox 19823D2B123785 Welded Bandsaw Blade 14 Tpi

Product Description

The LENOX 19823D2B123785 is a welded bi-metal bandsaw blade designed for continuous cutting operations on metal-cutting and woodworking band saws. The blade measures 149 inches (12 feet 5 inches) in length and 0.5 inch in width, with a 0.035-inch body thickness and a 14 teeth-per-inch (TPI) constant pitch. The tooth material is M42 high speed steel, which provides wear resistance during demanding cuts. A spring steel back absorbs stress and resists fatigue over long run times. Licensed HVAC, plumbing, and general trade technicians who cut pipe, tubing, or structural shapes on a stationary band saw will find this blade suited to those tasks.

This blade covers a wide range of materials including alloy steel, carbon steel, stainless steel, structural steel, tool steel, aluminum, non-ferrous metals, and wood. The straight tooth form with a single-level set and no rake angle is optimized for contour cutting. It fits standard band saws that accept a 149-inch blade with a 0.5-inch width. The Classic series construction and milled toothed edge are intended for shops and field technicians who run production-level cutting on pipe, bar stock, and structural sections.

Key Features

• Bi-metal construction: M42 high speed steel teeth bonded to a spring steel back for durability and fatigue resistance
• 14 TPI constant pitch for consistent chip load across a range of material thicknesses
• 0.058-inch kerf width minimizes material loss per cut
• Toothed and milled cutting edge for smooth, accurate contour cuts
• Single-level tooth set with straight tooth form — no rake angle — suited to a broad material range
• Welded construction provides a continuous loop ready to install without further preparation

Compatibility

Designed as an OEM-style replacement or direct-fit blade for stationary band saws that accept a 149-inch loop, 0.5-inch wide, 0.035-inch thick blade. Confirmed material applications include alloy steel, aluminum, non-ferrous metals, carbon steel, stainless steel, structural steel, tool steel, and wood.

Installation Notes

Blade installation should be performed by a qualified technician familiar with band saw operation. Power down and lock out the saw completely before removing the old blade or mounting the new one. Verify that blade tension, guide bearing clearance, and wheel alignment are set to the saw manufacturer specifications before resuming cuts. Wear cut-resistant gloves when handling the uninstalled blade loop.