Lenox 1355D2C12127 Band Saw Blade Coil 6 Tpi Bi-metal

Product Description

The LENOX 1355D2C12127 is a bi-metal band saw blade coil stock designed for continuous cutting applications in trade and industrial environments. The blade measures 1/2 inch wide and 0.035 inches thick, with a 100-foot coil length that allows users to cut custom blade lengths as needed. The cutting edge features high speed steel teeth in a hook tooth form at a constant 6 teeth per inch (TPI) pitch, delivering consistent chip clearance and cut quality. The flexible back construction reduces blade fatigue and breakage during contour cutting operations. This coil stock is intended for use by metal fabricators, pipe fitters, HVAC technicians, and maintenance professionals who cut blades to fit specific band saw machines on the job.

This blade coil is suited for contour cutting in both residential and light commercial trade applications. The 6 TPI hook tooth configuration handles general-purpose metal cutting, including structural steel, pipe, and tubing. The Lenox tooth set geometry is optimized for consistent cut tracking and blade life. Cutting a blade from coil stock requires a blade welder or appropriate joining equipment; coil length of 100 feet provides multiple blade lengths from a single purchase, making it practical for shops that run multiple saw sizes or need to keep replacement stock on hand.

Key Features

• Bi-metal construction with high speed steel teeth for extended blade life on metal cutting applications
• Hook tooth form at 6 TPI constant pitch for aggressive chip clearance and consistent cut rate
• 1/2 inch blade width with 0.035 inch thickness for compatibility with a wide range of band saw frames
• Flexible back design reduces stress cracking and extends service life during contour cuts
• 100-foot coil stock format allows custom blade lengths to be cut and welded to machine specifications
• Contour cutting capable per manufacturer specification

Compatibility

Designed as a general-purpose bi-metal band saw blade coil stock for use in band saw machines that accept 1/2 inch wide blades. Blade length is field-determined by cutting from the 100-foot coil and welding to the required loop length for the specific saw.

Installation Notes

Blade fabrication from coil stock should be performed by a qualified technician using a blade welder rated for bi-metal stock. Ensure the band saw is fully powered down and the wheel tension is released before removing or installing a blade. Wear cut-resistant gloves when handling uncoiled blade stock, as the material is under tension and edges are sharp. Verify that the finished blade width, thickness, and tooth orientation match the band saw manufacturer specifications before operating the machine.