Lenox 1130MAC12127 Band Saw Blade Coil 24 Tpi Bi-metal

Product Description

The LENOX 1130MAC12127 is a bi-metal band saw blade coil stock designed for continuous cutting operations in professional metal fabrication and maintenance environments. The coil delivers 250 feet of blade material that can be cut to length and welded to fit a wide range of band saw machines. At 1/2 inch wide and 0.020 inches thick, this blade runs a constant-pitch, 24-teeth-per-inch raker-set configuration with a flexible back. The high speed steel tooth tips bonded to a flexible alloy backing give it durability under repeated use. Metalworking shops, HVAC fabricators, and maintenance trades that run band saws on a daily basis will find this coil a practical bulk supply option.

This coil stock is suited for contour cutting applications in both production and service settings. The 24 TPI constant pitch is effective on thin-walled tubing, small-diameter pipe, conduit, and light structural stock commonly encountered in HVAC, plumbing, and general metalworking. The raker tooth set distributes cutting load evenly across the kerf, reducing blade deflection on curved cuts. Because the blade ships as uncut coil stock, it must be cut to the correct loop length and butt-welded on a blade welder before installation on any band saw machine.

Key Features

• Bi-metal construction: high speed steel teeth bonded to a flexible alloy back for durability and fatigue resistance
• 24 teeth per inch constant pitch for smooth cuts on thin-walled and small-diameter material
• Raker tooth set for balanced chip clearance and reduced kerf deflection
• Flexible back design reduces cracking fatigue during tight-radius contour cuts
• 250-foot coil provides bulk supply for high-volume or multi-saw shops
• Straight tooth form suited for general-purpose metal cutting

Compatibility

Designed as bulk coil stock for use with band saw machines that accept 1/2-inch-wide blades; must be cut to length and welded to the correct loop size for each machine before use.

Installation Notes

Installation requires a blade butt-welder capable of welding bi-metal stock; do not attempt to install unwelded coil stock on a band saw. Power down and lock out the band saw before removing the old blade or installing the new loop. Tension and blade-guide settings should be verified per the band saw manufacturer specifications after installation. This work is typically performed by a qualified machine operator or tool-room technician.