Legris 3193 10 17 Male Run Tee Fitting 3/8 Bspp 290 Psi

Product Description

The LEGRIS 3193 10 17 is a push-to-connect male run tee tube fitting designed for compressed air and fluid distribution systems. It accepts a 10 mm outside diameter tube and connects to a 3/8 inch BSPP male thread, allowing a branch line to be added to a straight run without cutting or threading additional pipe. The body is glass-reinforced nylon with nickel-plated brass internal components and a nitrile O-ring seal. Rated to 290 psi maximum working pressure, it handles operating temperatures from -4 degrees F to 175 degrees F and carries a vacuum rating of 28 in-Hg. HVAC technicians, plumbers, and pneumatic system installers use this fitting for quick, tool-free tube connections in tight installations.

This fitting suits residential and light commercial pneumatic and fluid-handling applications where a tee branch is needed inline with a male threaded port. Its push-to-connect design allows tubing to be inserted and locked without clamps or thread sealant on the tube side. The 3/8 inch BSPP thread conforms to British Standard Parallel Pipe specifications, making it appropriate for systems designed to that thread standard. The compact body measures 1.81 inches in length, 1.81 inches in height, and 0.79 inches in width, fitting in confined panel or equipment enclosures.

Key Features

• Push-to-connect design for tool-free, quick tube insertion and release
• 290 psi maximum working pressure rating
• Operating temperature range: -4 degrees F to 175 degrees F
• 28 in-Hg vacuum rating for low-pressure vacuum applications
• Glass-reinforced nylon body with nickel-plated brass internals for corrosion resistance
• Nitrile O-ring seal compatible with common pneumatic and fluid media

Compatibility

Designed as an OEM-style push-to-connect male run tee for pneumatic and fluid distribution systems using 10 mm outside diameter tubing with a 3/8 inch BSPP male thread connection.

Installation Notes

Installation is performed by qualified HVAC technicians or plumbers working on pneumatic or fluid lines. Depressurize and lock out the system fully before removing or installing any fitting. Insert tubing straight and fully into the collet until it seats; confirm retention with a firm pull before repressurizing. Verify that the mating port thread is BSPP, not NPT, before assembly, as these thread forms are not interchangeable.