Legend Valve 111-206 Oil Tank Ball Valve 1/2x3/8 in

Product Description

The LEGEND VALVE 111-206 is a 1/4 turn ball valve designed for shutoff and flow control in oil tank supply systems. Rated to 125 PSI, the valve features a hard brass seat with PTFE seat and packing material for leak-resistant sealing in fuel oil and water service. The MNPT x flare end connections and quarter-turn handle actuation allow for fast, confident shutoff without tools. Sized at 1/2 x 3/8 inches nominal, the compact brass body fits tight mechanical spaces typical in residential and light commercial oil supply line installations. Licensed plumbers and fuel oil service technicians are the primary installers.

This valve is part of the Legend Valve T-566 Series and is intended for oil tank installations where a reliable manual shutoff is required between the tank and downstream supply components. The MNPT x flare configuration is standard in fuel oil service piping, making this valve a direct-fit option for both new installations and service replacements on residential heating oil systems. It handles both oil and water media, adding utility across common fuel oil service scenarios where dual-service capability is needed.

Key Features

• 1/4 turn quarter-turn handle actuation for fast, positive shutoff
• 125 PSI pressure rating suitable for residential fuel oil system pressures
• Hard seat construction with PTFE seat and packing for long-term seal integrity
• Brass body and trim resist corrosion in oil and water service
• MNPT x flare end connections match standard fuel oil supply line fittings
• 1/2 x 3/8 inch nominal size fits common oil tank outlet configurations

Compatibility

Designed as a replacement or new-installation ball valve for residential and light commercial oil tank supply lines using MNPT x flare connections at 1/2 x 3/8 inch nominal size. Rated for oil and water media service.

Installation Notes

Installation should be performed by a licensed plumber or qualified fuel oil service technician in accordance with local mechanical codes and NFPA 31 requirements for fuel oil systems. Shut off the fuel supply and relieve system pressure before removing or installing any valve. Inspect flare fittings for damage before making connections and use appropriate thread sealant rated for fuel oil service on the MNPT threads. Do not overtighten flare connections, as this can deform the flare seat and cause leaks.