L E Johnson 2200F601 Bypass Door Hardware Set 60 Inches

Product Description

The L E JOHNSON 2200F601 is a bypass fascia door hardware set designed for two-panel sliding door installations spanning a 60-inch opening. Each door panel can be up to 30 inches wide and 1-3/8 inches thick, with a maximum load rating of 50 pounds per door. The set includes a decorative aluminum fascia track, four single-wheel hangers, and one adjustable nylon floor guide, along with mounting screws and instructions. This hardware is suited for residential closet and interior door applications and is installed by general contractors, finish carpenters, and knowledgeable DIYers working on interior door systems.

This set is intended for bypass sliding door configurations where two doors travel in opposite directions on a shared track. The 60-inch track spans a standard 5-foot rough opening. The decorative aluminum fascia gives the track a finished appearance, making it appropriate for visible interior installations such as closets, pantries, and room dividers. The adjustable nylon floor guide keeps door panels aligned at the base without requiring floor anchoring of the panels themselves.

Key Features

• Fits two-panel bypass configuration for a 60-inch opening
• Supports door panels up to 30 inches wide and 1-3/8 inches thick
• Rated for up to 50 pounds per door panel
• Decorative aluminum fascia track for a finished interior appearance
• Includes four single-wheel hangers for smooth panel travel
• Adjustable nylon floor guide included for bottom panel alignment
• Mounting screws and installation instructions included

Compatibility

Designed for bypass sliding door installations using two panels, each 30 inches wide and 1-3/8 inches thick, in a 60-inch opening. Door panels must not exceed 50 pounds each.

Installation Notes

Installation is typically performed by finish carpenters or experienced DIYers as part of interior door rough-in or finish work. Power down any nearby electrical circuits before drilling into walls or headers. Verify that the header framing is structurally sound and capable of supporting the track and loaded door panels before fastening. Follow the included instructions for hanger adjustment and floor guide positioning to ensure smooth door travel and proper panel alignment.