Kyocera TLC04200 Milling Insert LOGU030310ER-GM PR1535

Product Description

The KYOCERA TLC04200 is a solid carbide milling insert designed for high-performance metal removal in demanding machining applications. This single-sided, right-hand insert carries the ISO designation LOGU030310ER-GM and is manufactured in the PR1535 grade with a MEGACOAT NANO PVD coating. The rectangular LOGU-style insert features a positive rake geometry and a honed cutting edge for clean, consistent cuts. With 4 cutting edges, a thickness of 0.1559 inches (3.96 mm), and a width of 0.2441 inches (6.20 mm), it is built for precision milling in abrasive and difficult-to-machine materials. Installation is by screw-holding method into compatible toolholders in the MFH and MFHI cutter series.

This insert is primarily intended for milling stainless steel, superalloys, and titanium, with secondary capability across steel, cast iron, and additional stainless and superalloy grades. It fits into MFH and MFHI series cutter bodies and is suited for production machining environments where tool life and surface finish consistency are critical. A maximum depth of cut of 0.4295 inches and a cutting edge effective length of 0.4690 inches make it appropriate for moderate to aggressive milling passes in CNC machining centers handling aerospace, energy, and general industrial components.

Key Features

• PR1535 grade with MEGACOAT NANO PVD coating for extended tool life in stainless steel and superalloys
• Positive rake geometry with honed cutting edge for reduced cutting forces
• 4 usable cutting edges per insert for cost-efficient indexing
• Maximum depth of cut: 0.4295 inches; cutting edge effective length: 0.4690 inches
• Screw-clamp holding method for secure seating in MFH and MFHI toolholders
• Compliant with ANSI and ISO insert standards (ANSI: LOGU030310ERGMPR1535; ISO: LOGU030310ER-GM)

Compatibility

Designed for use with KYOCERA MFH and MFHI series milling cutter bodies. Compatible toolholder systems must accept LOGU030310 insert geometry with a 0.1358-inch hole diameter and screw-clamp retention.

Installation Notes

This insert is installed and indexed by a machinist or tooling technician using the appropriate torx or hex key per the cutter body manufacturer specifications. Always de-energize and lock out the machine spindle before indexing or replacing inserts. Inspect the insert pocket and clamping screw for wear or damage before seating a new insert. Do not exceed the maximum depth of cut or feed rate specified in the cutter body documentation for this insert size.