Krylon a03640007 Silver Inverted Marking Paint 15 Oz

Product Description

The KRYLON a03640007 is a solvent-based inverted marking paint in silver, packaged in a 15 oz aerosol can with a net weight of 17 oz. Designed for spray application in the inverted position, it is built for line striping and surface marking tasks on job sites and utility layouts. The fast-drying formula reaches tack-free in 2 minutes and full dry in 3 minutes. It delivers bold, visible markings through a high-solids formulation that penetrates and adheres to both hot and cold surfaces. Licensed HVAC, plumbing, electrical, and general trade contractors use this product for layout marking before excavation, conduit runs, or utility locating work.

This paint is suited for exterior and interior use across a wide range of surfaces including asphalt, concrete, brick, grass, gravel, and masonry. It performs in general-purpose marking applications where semi-permanent, fade-resistant, and UV-resistant lines are needed. Application temperature range is 70 degrees F to 80 degrees F, with a minimum application temperature above 40 degrees F. Coverage reaches 468 linear feet per can. The aerosol is compatible with Krylon marking wands K07095 and K07096 for hands-free, walk-behind operation.

Key Features

• Inverted aerosol design for ground-level line marking without bending
• Fast dry time: tack-free in 2 minutes, full dry in 3 minutes
• High-solids formulation produces bold, bright, visible lines
• Fade-resistant and UV-resistant for lasting visibility
• Adheres to hot and cold surfaces including asphalt, concrete, grass, and masonry
• Does not contain methylene chloride
• MIR Compliant and VOC Compliant

Compatibility

Compatible with Krylon marking wands K07095 and K07096. Designed for use with striping and marking machines. Suitable for general-purpose line marking on asphalt, concrete, brick, grass, gravel, and masonry surfaces.

Installation Notes

Shake the can thoroughly before use and hold it in the inverted position during application. Apply only when surface and ambient temperatures are between 70 degrees F and 80 degrees F, and never below 40 degrees F. Use in well-ventilated areas and follow all flammable-aerosol handling precautions. Store away from heat sources and open flame.