Kipp K0122.2081X30 Adjustable Clamping Handle M8x1.25

Product Description

The KIPP K0122.2081X30 is a threaded stud adjustable clamping handle designed for secure, tool-free clamping and locking in industrial and mechanical assemblies. The handle features a die cast zinc body with a satin finish and a steel threaded stud with a black oxide coating. The M8 x 1.25 thread and 30 mm stud length allow the handle to mount directly into tapped holes on fixtures, jigs, workholding devices, and machine components. The 65 mm handle radius provides adequate leverage for hand-tightening under load. A 20-degree handle arm angle supports ergonomic operation in confined or angled mounting positions. This handle is commonly installed by machine builders, maintenance technicians, and production equipment assemblers.

The K0122.2081X30 is suited for use in light to medium-duty clamping applications on industrial fixtures, tooling plates, enclosures, and positioning equipment. The adjustable design allows the handle arm to be repositioned to avoid obstructions or to optimize grip angle after installation. The black oxide steel stud and die cast zinc body make it appropriate for dry or lightly oiled indoor environments. It meets DIN EN 12844 material specification standards and is both REACH and RoHS compliant, making it suitable for use in regulated manufacturing environments including electronics assembly and medical device production facilities.

Key Features

• M8 x 1.25 threaded stud with 30 mm threaded length for direct installation into tapped holes
• Die cast zinc handle body with satin finish and 65 mm handle radius length
• Steel stud and components with black oxide finish for corrosion resistance in dry indoor environments
• Adjustable handle arm at 20-degree angle for repositioning around obstructions
• 18.50 mm hub and body diameter with 13.50 mm base diameter for compact footprint
• Compliant with DIN EN 12844, REACH, and RoHS standards

Compatibility

Designed as a direct-mount threaded stud clamping handle for any fixture, jig, enclosure, or machine component with an M8 x 1.25 tapped hole requiring hand-adjustable clamping.

Installation Notes

Installation is performed by threading the steel stud directly into an M8 x 1.25 tapped hole by hand or with a wrench applied to the stud base, if accessible. Ensure the mating thread is clean and free of debris before installation. Disengage any clamping load and relieve mechanical tension on the assembly before removing or repositioning the handle arm. Follow applicable machinery safety standards and equipment manufacturer guidelines for torque and clamping force requirements.