Keystone KTFLED140PSR4OSFUNV8CSB Led Flood Light 140W

Product Description

The KEYSTONE KTFLED140PSR4OSFUNV8CSB is a selectable-wattage, selectable-CCT outdoor LED flood light built for commercial and industrial area lighting applications. It operates at either 140 watts or 100 watts and allows the installer to dial in color temperature at 3000K, 4000K, or 5000K directly at the fixture before energizing. Input voltage is universal, accepting 120 to 277 volts AC, which eliminates the need to specify voltage at the time of order. The fixture ships with a 3-pin photocell, a universal slipfitter, and a trunnion mount bracket included. CRI is rated at 80, and the die-cast aluminum housing carries a bronze finish.

This flood light is designed for outdoor area lighting where multiple mounting configurations are required from a single SKU. Typical applications include building facades, signage illumination, recreational venues, parking lots, and general site lighting. Ground mount, pole and tenon mount, and building mount are all supported by the included hardware. The 0-10 volt dimming input allows integration with lighting control systems, and the 3-pin photocell socket supports dusk-to-dawn operation. The wet location rating makes it suitable for exposed exterior installations in any climate, with an operating range from -40 degrees F to 122 degrees F.

Key Features

• Selectable wattage: 140W or 100W configurable at the fixture
• Selectable CCT: 3000K, 4000K, or 5000K field-adjustable before energizing
• Universal voltage input: 120 to 277 volts AC, single SKU covers most supply voltages
• 0-10V dimming compatible for integration with lighting control systems
• 3-pin photocell, universal slipfitter, and trunnion mount bracket all included
• DLC Premium listed and RoHS compliant; wet location rated
• 50,000-hour rated life with a 10-year limited warranty

Compatibility

Designed for outdoor commercial and industrial area lighting applications requiring ground, pole/tenon, or building mount configurations. Compatible with standard 3-pin photocell receptacles and universal slipfitter mounting systems.

Installation Notes

Installation should be performed by a licensed electrician in accordance with the NEC and applicable local codes. Disconnect and lock out all power at the panel before wiring or mounting the fixture. Confirm supply voltage is within the 120 to 277 volt AC range before energizing. Set the wattage selector and CCT selector to the desired position before the fixture is energized, as these settings are intended to be configured prior to first power-on.