Kennametal 7096804 A4G Grooving Insert Carbide Altin

Product Description

The KENNAMETAL 7096804 is a double-end carbide grooving insert designed for precision grooving operations on CNC lathes and turning centers. Built to the A4G insert style in size code 3, it delivers a cutting width of 0.120 inches (3.05 mm) and a maximum depth of cut of 0.138 inches (3.50 mm). The insert is manufactured from carbide with an AlTiN coating applied via PVD process, giving it strong wear resistance at elevated cutting temperatures. It carries manufacturer grade KCU10B and features a positive rake geometry for reduced cutting forces. Machinists and CNC operators in production turning environments are the primary users of this insert.

This insert is suited for grooving, parting, and related turning operations in both roughing and finishing contexts where a neutral hand orientation is required. The double-end design provides two usable cutting edges, extending tool life per insert. The A4G style fits into compatible A4-series toolholders that accept clamp-style insert holding. It is appropriate for general-purpose and high-productivity turning applications on a range of workpiece materials where a PVD-coated carbide grade is indicated.

Key Features

• A4G insert style, size code 3, neutral hand orientation
• Cutting width of 0.120 inches (3.05 mm) with 0.138-inch maximum depth of cut
• Double-end design provides 2 cutting edges per insert
• KCU10B carbide grade with AlTiN coating via PVD process
• Positive rake geometry for reduced cutting forces
• Corner radius of 0.008 inches (0.20 mm); GMP chip breaker geometry
• Clamp-style insert holding method compatible with A4-series toolholders

Compatibility

Designed for use with A4-series clamp-style grooving toolholders that accept size 3 grooving inserts with a 3.05 mm insert seat size.

Installation Notes

Installation of grooving inserts should be performed by a qualified machinist or CNC tooling technician. Power down and lock out the machine spindle before seating or replacing inserts. Ensure the insert pocket and clamping surfaces are clean and free of chips before seating the insert. Follow the toolholder manufacturer torque guidance for clamp screws and verify insert seating before resuming cuts.