Kennametal 7093350 Ccgt Turning Insert Carbide Altin

Product Description

The KENNAMETAL 7093350 is a CCGT-style carbide turning insert designed for precision metal cutting on CNC lathes and turning centers. It features an 80-degree diamond insert shape with a 7-degree relief angle, a 0.0313-inch corner radius, and an inscribed circle of 0.50 inches. The insert is manufactured from carbide with an AlTiN (aluminum titanium nitride) coating under the KCU10B manufacturer grade. Insert thickness measures 0.1875 inches. With two cutting edges per insert, this neutral-hand geometry suits a range of turning, finishing, and light profiling operations where dimensional accuracy and surface finish are priorities.

This insert is suited for CNC turning applications in job shops, production machining, and maintenance shops. The CCGT geometry with HP chip breaker is particularly effective on non-ferrous materials, stainless steels, and other materials where controlled chip formation and tight tolerances are required. Licensed machinists and CNC operators install these inserts in compatible CCGT toolholders as part of routine insert indexing and tooling setups.

Key Features

• CCGT insert style with 80-degree diamond shape and neutral hand orientation
• AlTiN coating under KCU10B grade for wear resistance in demanding cutting conditions
• HP chip breaker geometry for controlled chip formation and clean surface finishes
• 0.0313-inch corner radius for fine detail and tight-tolerance finishing passes
• Two cutting edges per insert for extended tooling value per piece
• Carbide substrate for rigidity and thermal stability during high-speed turning

Compatibility

Designed as an OEM-style replacement insert for use in standard CCGT-compatible turning toolholders. Consult toolholder documentation to confirm insert size code 432 fitment before installation.

Installation Notes

Insert indexing and replacement should be performed by a qualified machinist or CNC operator with the machine fully stopped and locked out per facility safety procedures. Use the appropriate torque wrench and insert clamp hardware specified by the toolholder manufacturer when seating the insert. Inspect the insert pocket and clamping components for wear or debris before seating a new insert. Do not exceed the cutting parameters specified in the toolholder and insert grade documentation.