Kennametal 6074027 Milling Insert XDPT120515SRGP KCPM40

Product Description

The KENNAMETAL 6074027 is a solid carbide milling insert carrying ANSI/ISO designation XDPT120515SRGP in the KCPM40 manufacturer grade. It features a dual PVD coating — TiAlN and AlCrN — engineered for high-temperature wear resistance in demanding milling operations. The insert is square in shape with a 90-degree included angle, four cutting edges, a positive rake geometry, and a chamfered and honed cutting edge style. At 0.5000 inches in width and length with a thickness of 0.2188 inches and a 1.50 mm (0.0590 inch) corner radius, this insert is built for precision metal removal. It is installed by machinists and CNC tooling technicians in production and job-shop milling applications.

This insert is suited for milling steel, stainless steel, superalloys, and titanium — material application codes P, M, and S. The GP chip breaker geometry supports controlled chip formation across these material groups. Its right-hand cutting orientation and positive rake angle make it appropriate for climb milling strategies on horizontal and vertical machining centers. The insert belongs to the XDPT series and is compatible with the 7792VXD12 cutter series. It is a single-sided insert secured by a screw-on holding method, making indexing straightforward during tool changes.

Key Features

• Dual PVD coating: TiAlN and AlCrN for elevated heat and wear resistance
• Solid carbide substrate in KCPM40 grade optimized for steel, stainless, superalloys, and titanium
• Four cutting edges on a square, single-sided insert body for extended tool life per insert
• Positive rake geometry with chamfered and honed cutting edge for reduced cutting forces
• 1.50 mm corner radius (0.0590 inch) and GP chip breaker for controlled chip formation
• Screw-on insert holding method for secure, repeatable indexing

Compatibility

Compatible with the KENNAMETAL 7792VXD12 cutter series. Conforms to ANSI and ISO standards under designation XDPT120515SRGP.

Installation Notes

Insert installation and indexing should be performed by a qualified machinist or tooling technician with the spindle fully stopped and the machine in a locked-out, tagged-out state per applicable safety procedures. Use the correct torx or hex key specified by the cutter body manufacturer when seating the screw-clamp; do not over-torque. Inspect the insert pocket and seating surface for chips or debris before installing a new insert edge. Confirm correct insert orientation for right-hand cutting before resuming operation.