Kennametal 5060122 Corner Radius End Mill Head 1in 5FL

Product Description

The KENNAMETAL 5060122 is a solid carbide corner radius end mill head designed for demanding milling operations in ferrous and difficult-to-machine materials. Part of the HARVI UGDE series, it features a 1-inch milling diameter, a 5-inch length of cut, and five helical flutes with a 43-degree helix angle. The AlTiN coating provides thermal resistance and extended tool life in dry or semi-dry cutting conditions. The straight 1-inch shank and single-end configuration make this tool a direct fit for compatible modular tooling systems used by machinists and CNC tool-room professionals.

This end mill head is suited for high-feed and finish milling passes on steel, stainless steel, cast iron, superalloys, and titanium workpieces. Its right-hand cutting and right-hand flute direction are standard for conventional CNC machining center setups. The 43-degree helix promotes smooth chip evacuation during deep-reach operations. With a 5-inch length of cut and 7.5-inch overall length, it handles deep-pocket and long-reach applications where standard-length tools cannot reach.

Key Features

• Solid carbide construction for rigidity and wear resistance in hard and abrasive materials
• AlTiN coating for high-temperature performance and extended tool life in ferrous alloys
• Five helical flutes with a 43-degree helix angle for efficient chip evacuation
• 5-inch length of cut supports deep-pocket and long-reach milling applications
• Right-hand cut, right-hand flute direction standard for CNC machining center compatibility
• Single-end, straight shank design for use with compatible modular toolholding systems

Compatibility

Designed for use with compatible HARVI UGDE series modular toolholding systems. Rated for primary workpiece materials including steel, stainless steel, cast iron, superalloys, and titanium.

Installation Notes

Installation and tool changes should be performed by a qualified machinist with the machine spindle fully stopped and the control in an e-stop or locked-out state. Confirm shank diameter and interface compatibility with the toolholder before mounting. Torque the clamping mechanism to the toolholder specification — do not use field estimates. Inspect the cutting edges and coating for chips or wear before each use.