KENNAMETAL Kennametal 3769433 DCMT3252FP KCU25 Carbide Turning Insert

Kennametal 3769433 DCMT3252FP KCU25 Carbide Turning Insert

Brand: KENNAMETAL
SKU: 3769433
Availability: In Stock

Ships same day if ordered by 12 pm

$43.16
$43.16
HAVE A QUESTION?

Our team is ready to help!

  • Voomi Supply

    Secure Payments

  • Voomi Supply

    Easy Returns

  • Voomi Supply

    Expert Advice

  • Voomi Supply

    Fast Shipping

Product Description

The KENNAMETAL 3769433 is a solid carbide turning insert with an AlTiN (aluminum titanium nitride) PVD coating and the DCMT3252FP geometry. It carries the ISO designation DCMT11T308 and the ANSI code DCMT3252. The insert features a 55-degree diamond (rhombic) shape, a positive rake angle of 15 degrees, and a 7-degree relief angle. The FP chip breaker is optimized for finishing operations, producing consistent chip control at light depths of cut. Manufactured under the KCU25 grade, it delivers moderate wear resistance combined with adequate toughness for steel, stainless steel, cast iron, aluminum, non-ferrous materials, and superalloys including titanium. Two cutting edges are available per insert.

This insert is suited for finishing passes on CNC lathes and turning centers in both production and job-shop environments. Typical applications include turning, facing, boring, back turning, and back boring. The neutral hand orientation makes it adaptable across right- and left-hand toolholders. It is primarily targeted at machining steel and stainless steel workpieces where surface finish and dimensional accuracy are priorities, with secondary capability in cast iron, aluminum and non-ferrous alloys, and superalloys. The screw-on holding method provides positive insert retention and repeatable indexing.

Key Features

  • AlTiN PVD coating for heat resistance and extended tool life in steel and stainless steel cutting
  • FP chip breaker geometry designed for finishing operations with maximum depth of cut of 0.0492 inches (1.25 mm)
  • 55-degree diamond insert shape provides a sharp, low-cutting-force geometry with positive rake and positive side clearance
  • KCU25 grade balances moderate wear resistance and toughness across steel, stainless steel, cast iron, aluminum, and superalloy workpiece materials
  • Screw-on mounting method with honed cutting edge for consistent indexing and repeatable insert positioning
  • Multi-use capability: turning, facing, boring, back turning, and back boring from a single insert style

Compatibility

Designed as an OEM-style replacement screw-on turning insert conforming to ANSI designation DCMT3252 and ISO designation DCMT11T308. Compatible with toolholders accepting DCMT-style screw-on inserts with a 0.1732-inch (4.40 mm) mounting hole diameter.

Installation Notes

Installation should be performed by a qualified machinist or tooling technician. Power down and lock out the machine spindle before indexing or replacing inserts. Use the appropriate Torx or hex key to secure the clamping screw to the toolholder manufacturer's specification. Inspect the insert pocket and clamping screw for wear or damage before seating a new insert, and verify correct seating before resuming cutting operations.

Technical Specifications
ANSI Insert Code
DCMT3252
ISO Insert Code
DCMT11T308
Insert Shape
D - Diamond (Rhombic) 55 degrees
Manufacturer Grade
KCU25
Coating
AlTiN
Coating Process
PVD
Chip Breaker
FP (Finishing)
Insert Material
Solid Carbide
Insert Length
11.63 mm (0.9156 inches)
Inscribed Circle
3/8 inch (0.3750 inches)
Insert Width
3/8 inch (0.3750 inches)
Insert Thickness
5/32 inch (0.1563 inches)
Corner Radius
1/32 inch (0.0313 inches)
Relief Angle
7 degrees
Rake Angle
15 degrees
Side Clearance
Positive
Rake
Positive
Cutting Edge Style
Honed
Insert Hand
Neutral
Number of Cutting Edges
2
Hole Diameter
0.1732 inches (4.40 mm)
Maximum Depth of Cut
0.0492 inches (1.25 mm)
Holding Method
Screw-On
Primary Workpiece Materials
Steel, Stainless Steel, Superalloys and Titanium
Multi-Use Applications
Turning, Facing, Boring, Back Turning, Back Boring
Standards
ANSI, ISO
Material Grade
C2, C6
Weight
0.1 pounds
Brand
KENNAMETAL
Manufacturer Part Number
3769433
KENNAMETAL Kennametal 3769433 DCMT3252FP KCU25 Carbide Turning Insert

Vendor: KENNAMETAL

Kennametal 3769433 DCMT3252FP KCU25 Carbide Turning Insert

$43.16

Vendor: KENNAMETAL

Kennametal 3769433 DCMT3252FP KCU25 Carbide Turning Insert

$43.16

Related Products

Customer Support Image

Need Support?

Call Jack and His Team