Kennametal 3093635 Indexable Face Mill 2.5in Ksom Mini

Product Description

The KENNAMETAL 3093635 is an indexable chamfer-angle face mill designed for medium-pitch milling operations in metalworking and machining environments. Built on the KSOM Mini platform, this tool accepts five OF.T 06L5 inserts secured by screw-clamp holding, delivering a right-hand cutting action with a minimum cutting diameter of 2.5 inches and a maximum cutting diameter of 2.846 inches. Maximum depth of cut is 3.5 mm (0.138 inches). The 3/4-inch arbor hole diameter and keyway keep the body locked securely to the spindle during operation. This cutter is typically installed and managed by machinists, tool-and-die professionals, and CNC operators working in job shops or production facilities.

The 3093635 face mill is suited for face milling, chamfering, and shoulder-finishing operations on ferrous and non-ferrous workpieces. Its five-flute, medium-pitch configuration supports stable chip evacuation at moderate feed rates. With a maximum rated speed of 10,030 RPM, it is appropriate for mid-range spindle applications on vertical machining centers and horizontal mills. Coolant-through capability is not supported on this body; flood or mist coolant directed externally is the standard cooling method for this configuration.

Key Features

• KSOM Mini series platform with five insert pockets for medium-pitch face milling
• Compatible with OF.T 06L5 inserts, secured by screw-clamp method
• Right-hand cutting direction; 43-degree chamfer angle geometry
• Maximum rated speed of 10,030 RPM
• 3/4-inch arbor hole with keyway for positive drive engagement
• Maximum depth of cut of 3.5 mm (0.138 inches)

Compatibility

Designed for use with OF.T 06L5 series inserts as part of the KENNAMETAL KSOM Mini milling system. Verify spindle arbor size and insert grade selection against the workpiece material before use.

Installation Notes

Installation should be performed by a qualified machinist or CNC operator. Power down and lock out the machine spindle before mounting or removing the cutter body. Torque all insert screws using the appropriate Torx or hex key per the insert manufacturer's tooling documentation. Confirm arbor fit and keyway alignment before bringing the spindle to operating speed.