KENNAMETAL Kennametal 1160344 Turning Insert VNMG433 KC850 Carbide

Kennametal 1160344 Turning Insert VNMG433 KC850 Carbide

Brand: KENNAMETAL
SKU: 1160344
Availability: In Stock

Ships same day if ordered by 12 pm

$295.76
$295.76
HAVE A QUESTION?

Our team is ready to help!

  • Voomi Supply

    Secure Payments

  • Voomi Supply

    Easy Returns

  • Voomi Supply

    Expert Advice

  • Voomi Supply

    Fast Shipping

Product Description

The KENNAMETAL 1160344 is a solid carbide turning insert in the VNMG433 geometry, designed for CNC and manual lathe operations in production and job-shop environments. It carries the KC850 grade designation, featuring a multilayer CVD coating of TiC, TiCN, and TiN that delivers moderate wear resistance combined with high toughness. The insert has a 35-degree diamond (rhombic) shape with a negative rake angle and neutral hand orientation, making it versatile across turning, facing, boring, back turning, and back boring operations. The inscribed circle measures 0.5 inches, insert length is 22.14 mm, and corner radius is 3/64 inches. Four cutting edges are available per insert, extending tool life and reducing per-edge cost.

This insert is suited for medium machining chip-breaker operations on steel, stainless steel, cast iron, and special or super alloys. It is appropriate for both roughing and semi-finishing passes where a balance of toughness and wear resistance is required. The negative side clearance and KENLOC series design make it compatible with clamp-and-pin style toolholders. Typical applications include production turning on CNC lathes in metalworking and industrial manufacturing settings. Machinists and tooling specialists working with ISO P, M, K, and S workpiece material categories will find the KC850 grade well matched to moderate-to-demanding cutting conditions.

Key Features

  • KC850 grade with multilayer CVD TiC, TiCN, TiN coating for toughness and wear resistance
  • 35-degree diamond insert shape (V) with negative rake for stability under interrupted and continuous cuts
  • Four usable cutting edges per insert for extended tool life
  • Suitable for turning, facing, boring, back turning, and back boring in a single insert geometry
  • Clamp and pin holding method compatible with KENLOC series toolholders
  • Meets ANSI and ISO standards; ANSI code VNMG433, ISO code VNMG220412

Compatibility

Designed for use with KENLOC series clamp-and-pin style toolholders accepting VNMG433 inserts with a 0.2031-inch hole diameter. Compatible workpiece materials include steel (P), stainless steel (M), cast iron (K), and special or super alloys (S) per ISO material classification. Multi-use application across turning, facing, boring, back turning, and back boring operations.

Installation Notes

Installation should be performed by a qualified machinist or tooling technician with the machine powered down and in a locked-out, tagged-out state per applicable safety procedures. Seat the insert fully in the pocket and secure with the clamp and pin per the toolholder manufacturer torque guidance. Inspect the insert seat and clamp for debris or wear before installation to ensure proper seating and edge engagement. Handle carbide inserts with care to avoid chipping cutting edges prior to use.

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Technical Specifications
ANSI Insert Code
VNMG433
ISO Insert Code
VNMG220412
Manufacturer Grade
KC850
Insert Material
Solid Carbide
Coating
TiC, TiCN, TiN (Multilayer CVD)
Insert Shape
V - Diamond (Rhombic) 35 Degree
Insert Hand
Neutral
Inscribed Circle
0.5 inches
Insert Length
22.14 mm (1.7434 inches)
Insert Thickness
3/16 inches (0.1875 inches)
Corner Radius
3/64 inches (0.0469 inches)
Hole Diameter
0.2031 inches
Number of Cutting Edges
4
Relief Angle
0 degrees
Rake Angle
0 degrees (Negative Rake)
Side Clearance
Negative
Chip Breaker
Medium Machining
Maximum Depth of Cut
1.25 mm (0.0492 inches)
Insert Holding Method
Clamp and Pin
Cutting Edge Style
Chamfered and Honed
Material Grade
C5, C6
Series
KENLOC
Primary Workpiece Material
Steel, Stainless Steel
Primary Workpiece Material Code
P, M, K, S
Standards
ANSI, ISO
Weight
0.0441 pounds
Brand
KENNAMETAL
Manufacturer Part Number
1160344
KENNAMETAL Kennametal 1160344 Turning Insert VNMG433 KC850 Carbide

Vendor: KENNAMETAL

Kennametal 1160344 Turning Insert VNMG433 KC850 Carbide

$295.76

Vendor: KENNAMETAL

Kennametal 1160344 Turning Insert VNMG433 KC850 Carbide

$295.76

Related Products

Customer Support Image

Need Support?

Call Jack and His Team