Kennametal 1094672 Indexable Boring Bar Left Hand A-sclp

Product Description

The KENNAMETAL 1094672 is a left-hand A-SCLP style indexable boring bar designed for internal turning and boring operations on CNC lathes and machining centers. Built from steel with a neutral rake angle of 0 degrees and a -5 degree lead angle, this toolholder accepts CP-style inserts secured by a screw-clamp holding method. The 1/2-inch shank diameter and 203.2-inch overall length make it compatible with standard lathe turrets. Through-coolant capability is supported via a 1/16-27 NPT coolant port, allowing direct coolant delivery to the cutting zone to manage chip evacuation and tool life in deeper bore applications.

This boring bar is suited for precision internal machining in ferrous and non-ferrous materials where left-hand tool orientation is required by the setup. It covers a minimum bore diameter of 15.24mm (0.600 inches), making it appropriate for small-bore finishing and semi-finishing passes in production or job-shop environments. The through-coolant feature makes it especially effective in deeper bore applications where flood coolant alone is insufficient. Typically installed by CNC machinists and toolroom technicians on turret lathes and turning centers.

Key Features

• Left-hand A-SCLP toolholder style for internal boring applications
• Minimum bore diameter of 15.24mm (0.600 inches)
• Through-coolant ready with 1/16-27 NPT coolant port for direct chip and heat management
• Accepts CP-style inserts with 1/4-inch inscribed circle and 3/32-inch thickness
• Screw-clamp insert holding method for secure, repeatable indexing
• Steel construction with neutral rake (0 degrees) and -5 degree lead angle

Compatibility

Designed for use with CP-style indexable inserts. Insert inscribed circle is 1/4 inch with a thickness of 3/32 inch. Verify insert style and geometry against your application requirements before ordering.

Installation Notes

Installation should be performed by a qualified CNC machinist or toolroom technician. Power down and lock out the machine before mounting or changing the toolholder. Ensure the shank is properly clamped in the turret to the correct overhang length to minimize vibration. Connect the coolant line to the 1/16-27 NPT port only after confirming thread compatibility with the machine coolant system.