Jergens 890316 Quick Release Pin Lanyard 16in Ss

Product Description

The JERGENS 890316 is a stainless steel cable lanyard designed to retain quick release pins during installation, maintenance, and service operations. The lanyard features a loop end on one side and an eye end on the other, allowing secure attachment to both the pin and an adjacent structure or component. The cable is 1/16 inch in diameter, coated in nylon to a total coated diameter of 1/8 inch, and runs 16 inches in overall length. Material grade is 300-series stainless steel, providing corrosion resistance in wet, outdoor, or industrial environments. This type of retention lanyard is a standard hardware item used across mechanical, maintenance, and industrial assembly applications.

This lanyard is suited for use wherever quick release pins are installed and must be prevented from being lost or dropped during service. Common applications include equipment panels, access doors, machinery guards, and structural assemblies in industrial and commercial settings. The 3/16 inch hole diameter is sized to accept standard quick release pin clevis or ring attachments. Electricians, millwrights, maintenance technicians, and assemblers working with pinned connections will find this a practical retention solution.

Key Features

• Loop and eye end configuration for dual-point attachment to pin and structure
• 300-series stainless steel cable for corrosion resistance in demanding environments
• Nylon coating over cable increases abrasion resistance and coated diameter to 1/8 inch
• 16 inches overall length provides adequate reach across typical pinned assemblies
• 3/16 inch hole diameter sized for standard quick release pin hardware
• Not galvanized - stainless steel base material provides inherent corrosion protection

Compatibility

Designed as a retention lanyard for use with quick release pins featuring a clevis, ring, or loop attachment point sized for a 3/16 inch hole diameter. Verify pin attachment geometry before installation.

Installation Notes

Installation is a mechanical task requiring no specialized trade license, though maintenance technicians and assemblers should follow site-specific lockout/tagout procedures before accessing pinned components on powered equipment. Thread the eye end onto the quick release pin and secure the loop end to a fixed nearby structure or the equipment frame. Confirm the lanyard length does not create a snag or interference hazard once the pin is in its operating position. Inspect the cable and end fittings periodically for kinking, fraying, or corrosion.