Jergens 23408 Center Pull Hoist Ring 1000 Lb Bolt-on

Product Description

The JERGENS 23408 is a safety engineered center pull hoist ring designed for secure, bolt-on attachment to machinery, tooling, and fabricated assemblies. Built from 4140 alloy steel with a black oxide finish, it carries a 1,000 lb working load limit and is rated to CE standards. The 3/8-16 thread size and single-hole bolt-on mount make installation straightforward for rigging professionals and millwrights. Center pull geometry allows the ring to pivot and swivel under load, keeping the lift path aligned and reducing side-load stress on the attachment point. This design is a core requirement for safe vertical and angular lifting in industrial environments.

The 23408 is suited for use in manufacturing plants, machine shops, and fabrication facilities where tools, dies, molds, or equipment housings need to be lifted repeatedly and safely. The bolt-on configuration supports permanent or semi-permanent installation on any component machined with a 3/8-16 tapped hole. It is specified by maintenance technicians, rigging crews, and tooling engineers who require a CE-compliant lift point without welding or custom fabrication. The black oxide finish provides mild corrosion resistance for indoor industrial use.

Key Features

• 1,000 lb working load limit rated to CE standards
• 4140 alloy steel construction for high strength-to-weight performance
• Black oxide finish for corrosion resistance in indoor environments
• 3/8-16 bolt-on thread - single mounting hole for fast installation
• Center pull swivel geometry reduces side-load stress during lifts
• Compact profile: ring height 2.67 inches, external width 1.84 inches

Compatibility

Designed as a bolt-on replacement or new-install hoist ring for any component with a 3/8-16 tapped mounting hole requiring a CE-rated center pull lift point.

Installation Notes

Installation is performed by qualified rigging personnel or millwrights familiar with ASME B30.26 or applicable lifting hardware standards. Always torque the mounting bolt to the specified 12 ft-lb using a calibrated torque wrench - do not exceed this value, as over-torque can damage the swivel mechanism. Verify the tapped hole depth and thread condition before installation. Inspect the hoist ring for cracks, deformation, or corrosion before each lift, and remove from service immediately if any defect is found.