Itw Buildex 8268957 Threaded Rod Anchor 3/8 in

Product Description

The ITW BUILDEX 8268957 is a swivel-style threaded rod anchor designed for securing 3/8-inch threaded rod to steel structural members. Part of the SH-TEK 50 product line, this anchor uses a Teks 5 self-drilling screw configuration that eliminates the need for a pre-drilled pilot hole in the base steel. The swivel head allows the rod to pivot slightly after installation, accommodating minor angular misalignment in hanging applications. With an ultimate pullout rating of 1,306 pounds, it provides a robust mechanical connection suitable for suspended load applications in commercial and industrial environments. Licensed trades rely on this style of anchor for conduit hangers, pipe supports, and strut-channel suspension systems.

This anchor is intended for use in steel framing and structural steel applications where threaded rod must be suspended or anchored from overhead steel. Typical installations include mechanical room pipe hangers, electrical conduit support runs, and HVAC duct suspension systems. The self-drilling Teks 5 point is rated for thicker-gauge steel, making it appropriate for structural steel members encountered in commercial construction. The swivel feature is especially useful when rod alignment must shift slightly to meet field conditions.

Key Features

• 3/8-inch diameter threaded rod compatibility for standard hanger rod sizing
• Teks 5 self-drilling point eliminates pre-drilling into steel base material
• Swivel head design accommodates minor angular misalignment after installation
• Ultimate pullout strength of 1,306 pounds for reliable load-bearing performance
• SH-TEK 50 series construction suited for commercial and industrial steel structures

Compatibility

Designed as an OEM-style threaded rod anchor for use with standard 3/8-inch threaded rod in steel hanging and support applications.

Installation Notes

Installation is typically performed by licensed electricians, pipefitters, or mechanical contractors working under applicable building and mechanical codes. Power down or de-energize any nearby electrical systems before beginning overhead work. Drive the self-drilling anchor into the steel member using a compatible hex-drive bit and power drill or impact driver set to an appropriate torque-limiting clutch setting. Inspect the installed anchor for full seating and confirm the swivel joint moves freely before loading the threaded rod.