Itm evl41264 Sds Plus Masonry Drill Bit 3/16 X 4.5 Inches

Product Description

The ITM evl41264 is an SDS-Plus masonry drill bit designed for use with rotary hammer drills in professional trade applications. The bit measures 3/16 inches in diameter with an overall length of 4.5 inches. A precision-ground carbide tip drives through concrete, brick, block, and other masonry materials at consistent speed while maintaining edge life over repeated use. The fluted shank geometry channels dust and debris out of the hole during drilling, reducing clogging and keeping the cut clean. The SDS-Plus shank locks securely into compatible rotary hammer chucks for maximum energy transfer on every stroke.

This bit is suited for residential and commercial construction tasks where holes must be driven into masonry substrates. Electricians, plumbers, HVAC installers, and general contractors reach for SDS-Plus bits when setting anchors, routing conduit, or penetrating concrete block walls. The 3/16-inch diameter is a common size for light anchor work and through-wall penetrations in standard masonry construction.

Key Features

• Precision-ground carbide tip for fast cutting and extended service life in masonry
• Fluted design promotes efficient dust and debris removal during drilling
• SDS-Plus shank provides positive chuck engagement and high energy transfer
• 3/16-inch diameter suits anchor setting and small-diameter penetration work
• 4.5-inch overall length accommodates standard masonry wall thicknesses

Compatibility

Designed for use with any rotary hammer drill equipped with a standard SDS-Plus chuck.

Installation Notes

SDS-Plus drill bits are installed and removed by trade professionals using rotary hammer drills with compatible SDS-Plus chucks — no tools required for bit changes. Always wear eye protection and a dust mask when drilling masonry, as silica-containing dust is a respiratory hazard. Confirm anchor or penetration locations against structural drawings before drilling, and verify that no embedded conduit, rebar, or utility lines are present in the drill path.

Technical Specifications

• Shank Type: SDS-Plus
• Drill Diameter: 3/16 inches
• Overall Length: 4.5 inches
• Tip Material: Carbide
• Application: Concrete, brick, block, and masonry

Standard Information

• Brand: ITM
• Manufacturer Part Number: evl41264