Iscar 5622714 Corner Chamfer End Mill 0.375 in 4 Flute

Product Description

The ISCAR 5622714 is a solid carbide corner chamfer end mill designed for precision chamfering and edge-breaking operations on ferrous and non-ferrous workpiece materials. Built with four flutes and a 38-degree helix angle, it delivers clean chip evacuation and stable cutting performance at competitive feed rates. The TiAlN coating adds heat resistance and wear protection, extending tool life in dry and semi-dry cutting conditions. With a 0.375-inch cutting diameter and a 0.016-inch chamfer width, this tool produces consistent, repeatable edge geometry. It is a single-end tool with right-hand flute direction and right-hand cutting action, suited for use in CNC machining centers and manual mills.

This end mill is used in general metalworking and precision machining environments where controlled chamfer edges are required on part features. The 0.75-inch length of cut and 3-inch overall length make it appropriate for standard-depth chamfering applications without extended reach. The 3/8-inch shank diameter fits common ER collet chucks and end mill holders found in most machine shop setups. Typical installers are CNC machinists and tool-and-die professionals working in job shop, production, or maintenance machining contexts.

Key Features

• 0.016-inch chamfer width for precise, repeatable edge geometry
• Four-flute design with 38-degree helix angle for efficient chip evacuation
• TiAlN coating for elevated heat resistance and extended tool life
• Solid carbide construction for rigidity and dimensional stability
• Right-hand cut, right-hand flute, single-end configuration
• 3/8-inch shank fits standard ER collet and end mill holder tooling

Compatibility

Designed as an OEM-style solid carbide corner chamfer end mill for use in CNC machining centers and manual milling machines accepting a 3/8-inch shank diameter toolholder.

Installation Notes

Installation should be performed by a qualified machinist familiar with rotating cutting tool safety. Secure the shank fully within the collet or end mill holder to the manufacturer-recommended engagement depth before tightening. Confirm spindle is fully stopped and machine is in a safe state before changing tooling. Inspect the cutting edges and coating condition before each use and replace the tool if chipping or excessive wear is observed.