Iscar 5622125 Milling Tip IC908 Carbide 6 Flute 0.500 in

Product Description

The ISCAR 5622125 is an end replaceable milling tip from the Multimaster MM EC-6 series, designed for modular milling tool systems. This carbide tip features a corner radius geometry with a 0.500-inch cutting width, a maximum depth of cut of 0.374 inches, and a 45-degree helix angle. The IC908 grade substrate is sub-micrograin carbide with a PVD-applied TiAlN coating, making it well suited for demanding cutting applications across a wide range of workpiece materials. It is installed by machinists and tool-room technicians working with Multimaster-compatible modular holders.

This milling tip is used in end milling operations on steel, stainless steel, cast iron, non-ferrous metals, superalloys, titanium, and hard materials. With a 6-flute configuration, a 90-degree lead angle, and a 0.016-inch corner radius, it is appropriate for shoulder milling, slot milling, and finishing passes where a controlled corner radius is required. The right-hand cutting orientation and the 0.650-inch functional length make it a practical choice for general machining centers running the MM EC-6 modular system.

Key Features

• IC908 sub-micrograin carbide grade with PVD TiAlN coating for extended tool life in steel and stainless applications
• 6-flute corner radius geometry with 0.016-inch radius and 90-degree lead angle
• 45-degree helix angle for smooth chip evacuation and reduced cutting forces
• 0.500-inch cutting width and 0.374-inch maximum depth of cut
• Cuts steel, stainless steel, cast iron, non-ferrous metals, superalloys, titanium, and hard materials (ISO P, M, K, N, S, H)
• ANSI standard compliant; sold individually (MOQ 1)

Compatibility

Designed for use with Multimaster MM EC-6 series modular milling holders accepting a 0.500B37R015 insert size tip interface. Verify holder compatibility by confirming the MM EC-6 connection style before ordering.

Installation Notes

Installation is performed by machinists or tool crib technicians following machine tool lockout/tagout procedures before changing any cutting tip. Seat the milling tip fully into the Multimaster holder and torque the locking mechanism per the holder manufacturer specification. Inspect the tip seating surface for chips or debris before engagement, as contamination at the interface will affect runout. No coolant-through capability is present on this tip; confirm the application does not require internal coolant delivery.