Iscar 5604699 Milling Insert Admt 1505 Pdr-hs IC928

Product Description

The ISCAR 5604699 is a solid carbide milling insert carrying the ANSI designation ADMT 1505PDR-HS IC928. It belongs to the HELISHRED series and is designed for high-feed and shoulder milling operations in demanding materials. The insert features a parallelogram shape with an 85-degree included angle, a positive rake geometry, and a honed cutting edge style. The IC928 grade substrate is finished with a PVD-applied TiAlN coating, optimized for cutting steel, stainless steel, superalloys, and titanium. Two cutting edges are available per insert, and the holding method is screw-type for secure clamping under interrupted or high-load cuts.

This insert is intended for use in ADK-series milling cutter bodies and is suited to both roughing and semi-finishing applications on CNC machining centers handling steel and exotic alloy components. Typical applications include shoulder milling, pocket milling, and ramp-entry operations where a positive rake and chip-thinning geometry reduce cutting forces on difficult-to-machine materials. The right-hand cutting configuration suits standard right-hand spindle setups common in production and job-shop environments.

Key Features

• IC928 grade with PVD TiAlN coating for extended tool life in steel, stainless steel, superalloys, and titanium
• HELISHRED series geometry with positive rake and honed edge for reduced cutting forces
• Parallelogram insert shape, 85-degree included angle, right-hand cut
• Two usable cutting edges per insert for cost-per-edge efficiency
• Maximum depth of cut: 0.472 inches; effective cutting edge length: 0.551 inches
• Screw-type insert holding for rigid, repeatable seating in ADK-series bodies

Compatibility

Designed for use with ADK-series milling cutter bodies as specified by the manufacturer. Insert style code is ADMT and size code is 1505. Verify cutter body compatibility against the ADK series pocket and seating specifications before installation.

Installation Notes

Installation should be performed by a qualified machinist or tooling technician. Ensure the spindle is fully stopped and the machine is locked out before changing inserts. Use the correct torx or hex key to seat the clamping screw to the cutter body specification; do not overtighten. Inspect the insert pocket and seating surface for chips or debris before installing a new insert to ensure accurate seating and runout.