Iscar 5604089 High Feed Milling Tip 12mm 2 Flute Carbide

Product Description

The ISCAR 5604089 is a high feed end replaceable milling tip designed for use in the FeedMill/Multimaster (MM FF) modular tooling system. Manufactured from sub-micrograin carbide in the IC908 grade with a TiAlN coating applied via PVD process, this right-hand tip delivers controlled chip formation across a wide range of workpiece materials. The cutting diameter measures 12.00 mm (0.4728 inches) with a maximum depth of cut of 0.68 mm (0.0268 inches), making it optimized for high feed rate, shallow-pass machining strategies. It carries two flutes and a 97-degree lead angle with a 2.0 mm corner radius. Licensed machinists and CNC tooling specialists install and index this tip at the machine.

This milling tip is suited for high feed milling applications in both light and production environments. The IC908 grade with TiAlN coating supports cutting in steel, stainless steel, cast iron, non-ferrous metals, superalloys, titanium, and hard materials (ISO material groups P, M, K, N, S, and H). The shallow depth of cut and high lead angle geometry allow aggressive feed rates while minimizing axial cutting forces, which benefits thin-wall parts and long-reach setups. It seats into compatible MM FF Multimaster holders and is indexed or replaced at the spindle without removing the holder body.

Key Features

• Sub-micrograin carbide substrate in IC908 grade for toughness and wear resistance in demanding cuts
• TiAlN coating via PVD process supports dry and semi-dry cutting across multiple material groups
• 12.00 mm cutting diameter with 0.68 mm maximum depth of cut optimized for high feed strategy
• 2.0 mm corner radius with 97-degree lead angle reduces radial cutting forces
• Right-hand cut, two-flute geometry with no chipbreaker for clean chip evacuation
• Replaces at the tip only - no need to remove the Multimaster holder body from the spindle

Compatibility

Designed for use with compatible ISCAR Multimaster MM FF series holders. Fits holders accepting the MM FF120R2.0-2T08 tip style. Refer to ISCAR Multimaster catalog data to confirm holder compatibility before ordering.

Installation Notes

This tip is indexed or replaced by a licensed machinist or CNC tooling technician following the machine tool builder lockout/tagout procedure before any tool change. Use the correct ISCAR torque key specified for the Multimaster system - do not use substitute wrenches. Inspect the holder pocket seating surface for chips or debris before installing the new tip. Confirm runout with an indicator after seating the tip before returning the spindle to service.