Iscar 5602495 Milling Insert HM90 Adkt 1505PDR IC928

Product Description

The ISCAR 5602495 is a solid carbide milling insert carrying ANSI designation HM90 ADKT 1505PDR in manufacturer grade IC928. It is a parallelogram-shaped, single-sided insert designed for use in HELI2000 series and HM90-15 cutter bodies. The insert features a TiAlN coating applied via PVD process, a positive rake geometry, and a honed cutting edge style. With two cutting edges, a 15-degree relief angle, and a chip breaker designation of PDR, it is engineered for productive milling of steel, stainless steel, superalloys, and titanium. Licensed HVAC and industrial machining technicians and toolroom operators install these inserts during cutter assembly or routine insert replacement.

This insert is suited for milling applications in metalworking environments where the primary workpiece materials are steel, stainless steel, superalloys, and titanium (material grades C1, C2, C5, C6; ISO codes P, M, S). The HM90 ADKT 1505PDR geometry fits HM90-15 series cutter bodies. The PDR chip breaker supports controlled chip formation at moderate-to-aggressive depths, with a maximum depth of cut of 0.472 inches (12.00 mm). The right-hand cutting orientation must be matched to the intended cutter body configuration before installation.

Key Features

• IC928 grade with TiAlN PVD coating for wear resistance on steel, stainless, and superalloy workpieces
• Positive rake, honed cutting edge reduces cutting forces and improves surface finish
• PDR chip breaker geometry supports chip control at depths up to 0.472 inches (12.00 mm)
• Two cutting edges per insert for extended tool economy
• Right-hand cutting orientation; screw-held insert mounting
• Compliant with ANSI and ISO 13399 standards

Compatibility

Designed for use in HM90-15 series cutter bodies per ANSI code HM90 ADKT 1505PDR IC928 and ISO code HM90 ADKT 1505PDR. Verify cutter body hand orientation before installation.

Installation Notes

Insert replacement is performed by qualified machining technicians or toolroom personnel. Ensure the machine spindle is fully stopped and locked out before removing or seating inserts. Use the appropriate Torx or hex key to the cutter body manufacturer's specified torque for the screw-held mounting system. Confirm right-hand orientation aligns with the cutter body seat before final tightening.