Iscar 5600609 Milling Insert Adkr 1505PDR-HM IC28 Carbide

Product Description

The ISCAR 5600609 is a solid carbide milling insert carrying the ANSI designation ADKR 1505PDR-HM in manufacturer grade IC28. It is a single-sided, right-hand parallelogram insert with a positive rake geometry and a honed cutting edge style. Thickness measures 0.236 inches with an inscribed circle of 0.378 inches. With two cutting edges and a maximum depth of cut of 0.472 inches, this insert is engineered for high-efficiency face and shoulder milling operations on non-ferrous metals. It is installed by machinists and CNC tooling technicians using a screw-holding method.

This insert is designed for use in the HELIMILL series and is compatible with HM90-15 cutter bodies. It targets non-ferrous metal workpiece materials, making it well suited for aluminum, copper, and similar alloy machining in both production and job-shop environments. The uncoated bright finish preserves tight dimensional tolerances and reduces built-up edge on sticky non-ferrous materials. It conforms to ANSI and ISO 13399 standards.

Key Features

• Solid carbide construction, uncoated bright finish for non-ferrous metal applications
• Positive rake geometry with honed cutting edge for reduced cutting forces
• Two cutting edges per insert; single-sided design
• Maximum depth of cut of 0.472 inches (12.00 mm)
• Corner radius of 0.0315 inches (1/32 inch, 0.80 mm) for controlled surface finish
• Screw-clamped insert holding method for secure seating under load
• Meets ANSI and ISO 13399 standards

Compatibility

Designed for use with the ISCAR HELIMILL series, specifically HM90-15 cutter bodies that accept ADKR 1505PDR-HM style inserts with a screw-holding method.

Installation Notes

Installation is performed by qualified machinists or CNC tooling technicians. Before changing inserts, ensure the spindle is fully stopped and machine power is locked out per applicable shop safety procedures. Use the correct torx or hex key specified by the cutter body manufacturer when seating the clamping screw — do not overtighten. Inspect the insert pocket for chips or debris before seating the new insert to ensure proper support and runout.