Iscar 5567180 Carbide Replaceable Tip Drill 0.657 in IC907

Product Description

The ISCAR 5567180 is a carbide replaceable tip drill from the ICM series, designed for high-performance drilling in demanding materials. The drill tip carries the IC907 grade, a submicron solid carbide formulation with a PVD-applied TiAlN/TiN coating. It features a 0.657-inch (16.69 mm) cutting diameter and a 140-degree drill point angle. The T-Land style geometry with web thinning reduces cutting forces at entry, making it well suited for difficult-to-machine workpieces. This tip is installed by machining professionals in production drilling applications where insert replacement is preferred over full tool changeout.

This replaceable tip is intended for use in the ISCAR ICM series drill bodies, specifically the ICM 167 ISO number designation with a size 16 insert seat. Primary workpiece materials include stainless steel, superalloy, and titanium (ISO material codes M and S). Secondary workpiece suitability extends to steel, cast iron, and hard materials (ISO codes P, K, and H). The slow spiral flute design and thinned point geometry are matched to the feed and speed requirements of these material groups in shop and production environments.

Key Features

• IC907 submicron solid carbide grade for extended tool life in tough materials
• TiAlN/TiN PVD coating resists heat buildup during interrupted and continuous cuts
• 140-degree drill point angle with thinned point reduces entry thrust force
• T-Land cutting edge style provides edge strength in abrasive workpiece materials
• Slow spiral flute design optimized for chip evacuation in stainless steel and superalloys
• Replaceable tip design minimizes downtime by allowing tip swap without removing the drill body

Compatibility

Designed for use with ISCAR ICM series replaceable tip drill bodies at insert seat size 16, corresponding to ISO number ICM 167. Verify seat size and body series before ordering.

Installation Notes

Replaceable drill tips of this type are seated and torqued into the drill body using the manufacturer-specified wrench or key included with the body. De-energize and lock out the machine spindle before removing or installing the tip. Inspect the insert seat for chips or contamination before seating the new tip. Follow the drill body manufacturer torque and installation procedure — do not use impact tools or improvised wrenches on the tip retention mechanism.