Io Hvac Controls UT32-VK-08 Ventilation Kit 8 Inch Damper

Product Description

The IO HVAC CONTROLS UT32-VK-08 is a complete ventilation kit that pairs the UT32 thermostat with an 8-inch motorized damper, delivering a ready-to-install solution for fresh-air ventilation control in residential and light commercial HVAC systems. The kit is designed to automate outdoor air introduction based on thermostat-driven commands, helping systems meet mechanical ventilation requirements without separate controls sourcing. At 8.275 pounds and packaged within an 11 x 11 x 13 inch footprint, the assembly ships as a matched set engineered to work together out of the box. Licensed HVAC technicians are the primary installers for this type of controlled ventilation equipment.

This ventilation kit is suited for residential forced-air systems and light commercial applications where code-compliant mechanical fresh-air ventilation is required. The UT32 thermostat coordinates damper open and close cycles to regulate outdoor air delivery into the return air stream. Typical installations integrate the kit into new construction or retrofit HVAC systems where a dedicated ventilation control circuit is needed to satisfy ASHRAE 62.2 or similar ventilation standards. The 8-inch damper size makes it appropriate for mid-range duct configurations common in single-family and small multi-family buildings.

Key Features

• Matched kit includes the UT32 thermostat and an 8-inch motorized damper for integrated ventilation control
• Automates fresh-air introduction cycles based on thermostat commands, reducing separate component sourcing
• 8-inch damper diameter suits mid-range residential and light commercial duct systems
• Compact package footprint of 11 x 11 x 13 inches simplifies staging and transport on the job
• Kit weight of 8.275 pounds keeps handling manageable during single-technician installs

Compatibility

Designed as an OEM-style ventilation control solution for residential and light commercial forced-air HVAC systems requiring a thermostat-controlled fresh-air damper assembly.

Installation Notes

Installation should be performed by a licensed HVAC technician familiar with low-voltage thermostat wiring and duct damper integration. Shut down the HVAC system at the disconnect and de-energize low-voltage control circuits before making any wiring connections. The damper should be installed in the outdoor air duct section with attention to airflow direction markings on the damper body. Consult local mechanical codes and ASHRAE 62.2 ventilation requirements before finalizing the installation design.