Io Hvac Controls UT32-VK-06 Ventilation Kit Thermostat Damper

Product Description

The IO HVAC CONTROLS UT32-VK-06 is a ventilation kit that pairs the UT32 thermostat with a 6 inch motorized damper in a single package. The kit provides controlled fresh-air ventilation for residential and light commercial HVAC systems, allowing the thermostat to regulate when and how much outdoor air is introduced into the conditioned space. The UT32 thermostat handles ventilation scheduling and damper control, while the included damper manages the physical airflow. At 7.275 pounds, the kit ships as a complete assembly ready for field installation by a licensed HVAC technician.

This kit is suited for forced-air systems where mechanical ventilation is required to meet indoor air quality standards. Typical applications include new construction and retrofit projects where a dedicated ventilation control strategy is needed. The 6 inch damper diameter fits standard 6 inch round duct. The UT32 thermostat integrates directly with the damper, eliminating the need to source and match components separately. Installers working on energy-code-compliant projects will find this kit appropriate for meeting ASHRAE 62.2 ventilation requirements in residential settings.

Key Features

• Complete ventilation kit - UT32 thermostat and 6 inch damper included together
• 6 inch damper diameter fits standard 6 inch round duct
• Thermostat controls damper operation for scheduled or demand-based ventilation
• Packaged as a matched set to simplify procurement and installation
• Compact footprint: 11 inches wide by 11 inches tall by 13 inches deep (packaged)

Compatibility

Designed as a matched ventilation control solution for forced-air residential and light commercial HVAC systems requiring a 6 inch duct damper with integrated thermostat control.

Installation Notes

Installation should be performed by a licensed HVAC technician familiar with low-voltage wiring and duct modification. Disconnect power to the air handler and any associated control circuits before beginning work. The damper must be mounted in an accessible section of duct with clearance for the actuator. Verify local mechanical and energy codes, including applicable ASHRAE ventilation standards, before commissioning the system.