Io Hvac Controls TD-2614-BM Rectangular Zone Damper 26x14

Product Description

The IO HVAC CONTROLS TD-2614-BM is a rectangular zone damper sized at 26 x 14 inches, designed for use in residential and light commercial HVAC zoning systems. It ships with a Belimo 3-wire actuator mounted at the bottom of the damper body. The actuator operates on a 60-second stroke cycle, providing controlled airflow regulation across individual zones. This assembly is built to match the dimensional and mechanical requirements of Trane and American Standard ducted systems. HVAC technicians install this damper as part of a multi-zone control setup to balance airflow and improve system efficiency throughout a structure.

This damper is suited for rectangular duct trunk or branch installations in forced-air zoning applications. Its bottom-mount actuator configuration is appropriate where top or side access is restricted. The Trane and American Standard compatibility makes it a practical direct-fit option for service technicians maintaining or upgrading existing zoning systems in those equipment lines. It is typically installed by licensed HVAC contractors working on residential or light commercial zone control projects.

Key Features

• 26 x 14 inch rectangular damper blade sized for Trane and American Standard duct systems
• Belimo 3-wire actuator included for reliable, field-proven actuation
• 60-second actuator stroke cycle for smooth, controlled zone transitions
• Bottom-mount actuator configuration for installations with restricted top clearance
• Designed as a complete assembly - damper and actuator ship together ready for installation

Compatibility

Designed for use with Trane and American Standard rectangular duct zoning systems requiring a 26 x 14 inch zone damper with a bottom-mount Belimo actuator.

Installation Notes

Installation should be performed by a licensed HVAC technician. Shut down the air handler and disconnect power to the zoning control panel before installing or wiring the actuator. Secure the damper body into the duct opening per standard sheet metal practices before connecting the 3-wire actuator leads to the zone control board. Verify actuator stroke direction and end-of-travel limits after power-up to confirm proper zone operation.