Io Hvac Controls RM-1410-BM Rectangular Zone Damper

Product Description

The IO HVAC CONTROLS RM-1410-BM is a rectangular zone damper designed for residential and light commercial HVAC zoning systems. It features a bottom-mount configuration and ships with a 3-wire Belimo actuator that operates on a 35-second travel time, providing reliable open and close control in ducted air distribution systems. The damper measures 14 inches by 10 inches at the duct opening and is built to integrate with standard zone control boards. Licensed HVAC technicians install this damper as part of multi-zone forced-air systems where individual room or area temperature control is required.

This damper is suited for residential forced-air zoning applications where rectangular ductwork is present. The bottom-mount actuator placement makes it practical in installations where side access is limited. It is typically installed in supply or return duct branches that serve individual zones, and it works in conjunction with a zone control panel and thermostat inputs. The 3-wire actuator wiring allows the control board to command both open and closed positions directly, which is standard for spring-return-free zone damper setups.

Key Features

• 14 inch by 10 inch rectangular duct damper opening for standard rectangular ductwork
• Bottom-mount Belimo actuator with 35-second travel time for smooth, reliable zone control
• 3-wire actuator wiring supports direct open and close commands from zone control boards
• Compatible with standard low-voltage zoning control systems
• Package dimensions of 16 inches wide, 17 inches tall, and 7 inches deep for straightforward handling and storage

Compatibility

Designed as an OEM-style replacement or new-installation zone damper for rectangular duct zoning systems that accept a 14 inch by 10 inch bottom-mount damper with a 3-wire Belimo actuator.

Installation Notes

Installation should be performed by a licensed HVAC technician following applicable mechanical codes. Power down the air handler and zone control panel before wiring the actuator to prevent damage to the control board or actuator. The 3-wire actuator connections should be made per the zone control board manufacturer's wiring diagram. Confirm duct opening dimensions before installation to ensure a proper fit and airtight seal.